84 lines
3.5 KiB
Plaintext
84 lines
3.5 KiB
Plaintext
---------------------------------------
|
||
]] LOCK PICKING [[
|
||
]] by:Black Cobra [[
|
||
---------------------------------------
|
||
|
||
So you want to be a criminal. Well, if you're wanting to be like James Bond
|
||
and open a lock in fifteen seconds, go to Hollywood because that's the only
|
||
place you're gonna do it. Even experienced locksmiths can spend 5 to 10
|
||
minutes on a lock if they're unlucky. If you are looking for extremely quick
|
||
access, look elsewhere.
|
||
|
||
The following instructions will pertain mostly to the "lock-in-knob" type
|
||
lock, since it is the easiest to pick. If there is sufficient demand, I will
|
||
later write a file discussing the other forms of entrance, including
|
||
dead-bolts.
|
||
|
||
First of all, you need a pick set. If you know a locksmith, get him to make
|
||
you a set. This will be the best possible set for you to use. If you can't
|
||
find a locksmith willing to supply a set, don't give up hope. It is possible
|
||
to make your own, if you have access to a grinder -- you can use a file, but
|
||
it takes forever. Even better would be to take a mail-order locksmith course
|
||
-- at the end of one you can legally buy key blanks and so forth, and can even
|
||
go into business for yourself! But those cost a lot of money, and most people
|
||
don't need to go to all the trouble.
|
||
|
||
The first thing you need to make your own is an allen wrench set (very small).
|
||
These should be small enough to fit into the keyhole slot. Now, bend the long
|
||
end of the allen wrench at a slight angle..(not 90 deg.) It should look
|
||
something like this:
|
||
|
||
#1
|
||
\\
|
||
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ (This is the handle that
|
||
\\\ was already here.)
|
||
\\\
|
||
\\\
|
||
\\\
|
||
\\\
|
||
|
||
Now, take your pick to a grinder or a file and smooth the end (#1) until it's
|
||
rounded so it won't hang inside the lock. Test your tool out on doorknobs at
|
||
your house to see if it will slide in and out smoothly.
|
||
|
||
Now this is where the screwdriver comes in. Is it small enough for it and
|
||
your pick to be used in the same lock at the same time, one above the other?
|
||
Let's hope so, because that's the only way you're gonna open it.
|
||
|
||
In the coming instructions, please refer to this chart of the interior of a
|
||
lock:
|
||
|
||
XXXXXXXXXXXXXXXXXXXXXXX| K
|
||
# # # # # # | E
|
||
# # # # | Y
|
||
* * | H
|
||
* * * * * * | O
|
||
| L
|
||
| E
|
||
XXXXXXXXXXXXXXXXXXXXXXX|
|
||
|
||
#= upper tumbler pin
|
||
*= lower tumbler pin
|
||
X= cylinder wall
|
||
|
||
(This is a greatly simplified drawing)
|
||
|
||
The object is to press the pin up so that the space between the upper pin and
|
||
the lower pin is level with the cylinder wall. Now, if you push a pin up, its
|
||
tendency is to fall back down, right? That's where the screwdriver comes in.
|
||
Insert the screwdriver into the slot and turn. This tension will keep the
|
||
"solved" pins from falling back down. Now, work from the back of the lock to
|
||
the front, and when you're through.....
|
||
|
||
There will be a click, the screwdriver will turn freely, and the door will
|
||
open. Don't get discouraged on your first try! It will probably take you
|
||
about 20-30 minutes your first time. After that you will quickly improve with
|
||
practice.
|
||
|
||
This is by no means the most efficient way of entering a house. If you would
|
||
like another item or two devoted to these other ways, let the sysop know.
|
||
|
||
[call:data-base] <714> 760-6977
|
||
|
||
|