textfiles/anarchy/WEAPONS/blowdart.ana
2021-04-15 13:31:59 -05:00

86 lines
2.7 KiB
Plaintext
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

---------------------------------------------------------------------
! !
! Advanced Blow Gun & Darts !
! Presented By !
! The Executioner and The Running Rebel !
! !
---------------------------------------------------------------------
Introduction:
In this article we will attemt to explain the use and manufacture of a
powerfull blow-gun and making darts for the gun.
WARNING!!!!!!
-------------
The possestion of the blow gun described in this article IS a felony. So be
carefull where you use it. I dont want to get you all busted.
Needed:
1. Several strands of yarn (About 2 inches a piece)
2. A regular pencil
3. A 2 1/4 inch long needle (hopefully with a beaded head. If
not obtainable wrap tape around end of needle.
4. 2-3 1/4 foot pipe. (PVC or Aluminum) Half a inch in diameter
Part // : Constructing the dart.
--------------------------------
1st- Carefully twist and pull the metal part (Along with eraser) of the pencil
till it comes off.
2nd- Take Pin and start putting about 5-7 Strands of yarn on the pin. Then
push them up to the top of the pin. But not over the head of the pin (or the
tape).
3rd- Push pin through the hollow part of the head where the pen cil was
before.
4th- That should for a nice looking dart. (see illustration)
####\
#####>>>>>-----
####/
# is the yarn
> is the head of the pencil
- is the pin it-self
Part ///: Using the Darts
-------------------------
1st- Now take the finished dart and insert it in the tube (if it is too small
put on more yarn.)
2nd- Aim the tube at a door,wall,sister, ect.
3rd- blow on the end of the pipe.
4th- Sometimes the end of the pipe may be sharp. When this happens I suggest
you wrap it with some black electrician tape. It should feel alot better.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Call the Executioners Blade Ae. (805) 498-0786
Password -=> <Space Bar>
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Copyright 1985 by:
Blade Publishing. Please Leave all titles in-tact.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Watch for our next article:
Poisons and iritants for blow gun darts. A proven way to get rid of that
sister that is always bugging you. Or people like:
The Cat, The Software Master, The Mercinary, Kid Phreak, The Slasher, add your
fags here.
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Call The Works BBS - 1600+ Textfiles! - [914]/238-8195 - 300/1200 - Always Open