textfiles/anarchy/LOCKPICKING/master3.hac

53 lines
1.6 KiB
Plaintext
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

HOW TO PICK MASTER LOCKS
Have you ever tried to impress your friends by picking one of those Master
combination locks and failed? Well then read on. The Master lock company has
made this kind of lock with a protection scheme. If you pull the handle of it
hard, the knob won't turn. That was their biggest mistake...... Ok, now on to
it.
1st number. Get out any of the Master locks so you know what's going on.
1: The handle part (the part that springs open when you get
the combination),
pull on it, but not enough so that the knob won't move. 2: While pulling on it
turn the knob to the left until it won't move any more. Then add 5 to this
number. Congradulations, you now have the 1st number.
2nd number. (a lot tougher) Ok, spin the dial around a couple of times,
then go to the 1st number you got, then turn it to the right, bypassing the 1st
number once. WHEN you have bypassed. Start pulling the handle and turning it.
It will eventually fall into the groove and
lock. While in the groove pull on
it and turn the knob. If it is loose go to the next groove; if it's stiff you
got the second number.
3rd number: After getting the 2nd, spin the dial, then enter the 2 numbers,
then after the 2nd, go to the right and at all the numbers pull on it. The lock
will eventually open if you did it right. If can't do it the first time, be
patient, it takes time.
Downloaded From P-80 International Information Systems 304-744-2253