53 lines
1.4 KiB
Plaintext
53 lines
1.4 KiB
Plaintext
Exploding lightbulbs by The Jolly Roger
|
|
|
|
Materials needed:
|
|
|
|
-lightbulb (100w)
|
|
-socket (duh...)
|
|
-1/4 cup soap chips
|
|
-blackpowder! (open some shotgun shells!)
|
|
-1/4 cup kerosene orgasoline
|
|
-adhesive tape
|
|
-lighter or small blowtorch
|
|
-glue
|
|
|
|
Procedure for a simple exploding lightbulb:
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
- Drill a small hole in the top of the bulb near the threads!
|
|
|
|
- Carefully pour the blackpowder into the hole. Use enough so
|
|
that it touches the filament!
|
|
|
|
- Insert into socket as normal (make sure the light is off or
|
|
else YOU will be the victim!!)
|
|
|
|
- Get the hell out!!
|
|
|
|
Procedure for a Napam Bulb:
|
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~
|
|
|
|
- Heat kerosene/gasoline in a double boiler
|
|
|
|
- Melt soap chips, stirring slowly.
|
|
|
|
- Put somewhere and allow to cool
|
|
|
|
- Heat the threads of the bulb VERY carefully to melt the glue.
|
|
Remove threads, slowly drawing out the filament. Do NOT break the
|
|
cheap electrical igniters and/or the filament or this won't work!!
|
|
|
|
- Pour the liquid into the bulb, and slowly lower the filament
|
|
back down into the bulb. Make sure the filament is dipped into the
|
|
fluid.
|
|
|
|
- Re-glue the threads back on. Insert it into a socket frequently
|
|
used by the victim and get the hell out!!
|
|
|
|
When the victim flips the switch, he will be in for a BIG surprise!
|
|
|
|
Have fun! -Jolly Roger-
|
|
|
|
|
|
|