39 lines
1.7 KiB
Plaintext
39 lines
1.7 KiB
Plaintext
How to make a Pay-Phone Bomb
|
|
|
|
TO ALL PEOPLE WHO DON'T BELIEVE IN GIVING THE PHONE COMPANY 25 CENTS FOR
|
|
A CALL, OR EVEN A DIME, THIS IS FOR YOU.
|
|
|
|
I DON'T KNOW ABOUT THE REST OF THE COUNTRY BUT HERE IN N.Y.C. THEY HAVE
|
|
ARMOURED THE PAY-PHONES WITH STEEL PLATES SURROUNDING THE BOTTOM HALF OF
|
|
THE PHONE. THIS SHEILD WILL WITHSTANDANY ATTACK BY M-80'S, BLOCK-BUSTERS,
|
|
SUPER-BLOCKBUSTERS, ASH-CANS, PINAPPLES, ETC...... (EXCEPT DINAMITE)TO
|
|
DESTROY THIS PLATING AND MOST OF THE BOTTOM HALF OF THE PHONE, USE THE
|
|
FOLLOWING DEVICE.
|
|
|
|
FIRST YOU MUST BLOW OUT THE HING ON THE COIN RETURN SLOT. THIS CAN BE
|
|
DONE WITH MOST CONVENTIONAL WEAPONS SUCH AS A BLOCK-BUSTER. THEN, TAKE
|
|
A 6 INCH SECTION OF THE SAME TYPE OF BENDABLE METAL TUBING THAT SURROUNDS
|
|
THE WIRE TO THE RECIEVER, BUT IT MUST BE AT LEAST 1 INCH IN DIAMETER.
|
|
THEN, SOLDER A PEICE OF SHEET METAL ON TO ONE SIDE OF THE TUBE TO SEAL
|
|
THAT SIDE. THEN FILL THE TUBE WITH THE SAME FLASH-POWDER USED IN BLOCK
|
|
BUSTERS AND FILL THAT END WITH STRONG EPOXY TO SEAL IT. ONE THING I
|
|
FORGOT TO MENTION, BEFORE SOLDERING THE ROUND PEICE OF SHEET METAL TO
|
|
THE TUBE, DRILL A SMALL HOLE IN IT JUST BIG ENOUGH TO FIT A PEICE OF
|
|
DEMOLITION FUSE THROUGH. THEN PUT THE PEICE THOUGH BEFORE FILLING IT.
|
|
SEAL THE EDGES OF THE FUSE WITH THE SAME EPOXY USED TO SEAL THE OPPOSITE
|
|
END OF TUBE.
|
|
|
|
THEN, WHEN COMPLETE, SHOVE THE THING UP INTO THE COIN SLOT WITH THE EPOXY
|
|
END GOING IN FIRST. NEXT THING YOU KNOW, YOU'VE GOT DIMES, NICKELS, AND
|
|
QUARTERS FALLING ALL AROUND YOU.
|
|
|
|
|
|
***WARNING***
|
|
=============
|
|
|
|
USE UNDER ADULT SUPERVISION. (Ha Ha Ha)
|
|
|
|
Downloaded from the Pipeline BBS (805)-526-5660
|
|
|
|
|