textfiles/anarchy/INCENDIARIES/impmune.hac

69 lines
2.5 KiB
Plaintext
Raw Permalink Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

How to open your own M-80 Factory
**********
*Supplies*
**********
Chicago Paper Tube. Phone # 1-312-666-1404. You will be getting the paper
tubes from here. Order tubes that are 1/2" in diameter by 1 1/2" long with a
1/16" wall with RED outer wrap.
Paper Products. 1310 5th St., Tempe, AZ. 85281. Order 1/2" diameter paper end
plugs. Write to them for prices. REMEMBER: for every 100 paper tubes you
order, you must order 200 paper end plugs.
Midwest Fireworks. 8550 RT. 224,Deerfield,OH. 44411. Phone 1-800-321-2400.
Order one roll of 1/8" water proof fuse. Each M-80 needs a 2" fuse, so for
every 100 paper tubes you order, you should have 17' of water proof fuse.
Barium Chemicals Inc.,P.O. Box 218,County Rd. 44, Steubenville, OH. 43952.
Phone 1-614-282-9776. Order Potassium Perchlorate. Order 2 pounds for every
250 paper tubes you order.
Alcan Metal Powder Div.,P.O. Box 290, Elizabeth,NJ 07207. Phone 1-201-353-
4600. Order #AL-105 Aluminum Powder. Order 1 pound for every 250 paper tubes
you order.
Buy 1 gallon of Elmers glue from a hardware store or lumber yard.
**********
*Assembly*
**********
1. Put 1 drop of glue on the inside of one end of the tube and insert the
paper end plug.
2. Punch or drill a 1/8" hole in the side of the paper tube.
3. Cut the fuse you purchased into 2" long pieces.
4. Insert the fuse into the hole in the paper tube and glue in place.
5. Scoop the paper tube with the fuse into a container of flash powder. The
paper tube should be about 2/3 full.
6. Put glue on the end plug and insert it into the paper tube filled with
flash powder.
7. The completed M-80 firecracker should dry and the glue will become hard in
30-45 minutes.
**********************
*Flash Powder Formula*
**********************
Sensitive to friction and impact. High Explosive!
Potassium Perchlorate 2 lbs.
Aluminum Powder 1 lb.
There must be a 2 to 1 ratio of Potassium Perchlorate to Aluminum Powder in
order for the flash powder to be good. It must also be mixed well.
Suggested Price for the M-80's
You can make up your own price,but here are some prices.
2 for $1.00 11 for $5.00 24 for $10.00 50 for $20.00 100 for $40.00