83 lines
3.4 KiB
Plaintext
83 lines
3.4 KiB
Plaintext
|
AT&T 3030, 3035, 3430, 3730
|
|||
|
|
|
|||
|
|
NOTES: These units have five NAM's and are manufactured by OKI.
|
|||
|
|
The ESN prefix is 129 decimal & 81 hex.
|
|||
|
|
AT&T 1-800-232-5179
|
|||
|
|
|
|||
|
|
|
|||
|
|
NAM programing:
|
|||
|
|
|
|||
|
|
1. Turn power on.
|
|||
|
|
|
|||
|
|
2. Within 30 seconds press RCL & MENU keys together and release, enter
|
|||
|
|
* 1 2 3 4 5 6 7 8 #, (or enter dealer password if one has been used).
|
|||
|
|
|
|||
|
|
NOTE: If the dealer password is unknown and the factory default does not
|
|||
|
|
work use the following "back door" code: * 6 2 7 2 9 8 5 4 #.
|
|||
|
|
|
|||
|
|
3. The phone will then display the Software Version followed by the
|
|||
|
|
ESN in hex
|
|||
|
|
|
|||
|
|
NOTE: If you used the dealer password successfully in step 2 go straight
|
|||
|
|
to step 5 below.
|
|||
|
|
|
|||
|
|
3. The phone will display "ENTER NEW PW AND STO" you may enter a ten digit
|
|||
|
|
password at this stage to be used in future re-programings. Press
|
|||
|
|
STO to retain default password or enter a ten digit password and press STO.
|
|||
|
|
|
|||
|
|
4. The phone will display "RE-ENTER PW AND STO" re-enter the password, press
|
|||
|
|
STO to confirm. Again, press STO to retain default password.
|
|||
|
|
|
|||
|
|
5. The following "re-set" options can be bypassed by pressing volume down
|
|||
|
|
to scroll. Each step is followed two seconds later by "Press * to Clear",
|
|||
|
|
you can either press * or press CLR to bypass.
|
|||
|
|
|
|||
|
|
Step# Display Action
|
|||
|
|
|
|||
|
|
01 SSN# Wait 2 seconds.
|
|||
|
|
Press * to Reset Press * to clear social security (not used)
|
|||
|
|
02 SPD MEM CLR Wait 2 seconds.
|
|||
|
|
Press * to Reset Press * to initialize speed dial memories.
|
|||
|
|
03 DEFAULT DATA SET Wait 2 seconds.
|
|||
|
|
Press * to Reset Press * to initialize unit.
|
|||
|
|
POWER ON MESSAGE Wait 2 seconds.
|
|||
|
|
Enter ALPHA Enter up to 8 characters followed by STO,
|
|||
|
|
or press CLR to bypass.
|
|||
|
|
|
|||
|
|
|
|||
|
|
1. The STO key stores each entry.
|
|||
|
|
|
|||
|
|
2. The Volume UP key scrolls down through the steps.
|
|||
|
|
|
|||
|
|
3. The Volume DOWN key scrolls UP through the steps.
|
|||
|
|
|
|||
|
|
4. At any time press CLR to exit program mode. Phone will display
|
|||
|
|
"NAM x Program" press CLR to exit, or continue with additional NAMS.
|
|||
|
|
You may also go directly to any NAM by pressing Volume Down when phone
|
|||
|
|
displays "NAM x Program". NAM's 2 through 5 only have steps 01 - 06
|
|||
|
|
below.
|
|||
|
|
|
|||
|
|
PROGRAMMING DATA:
|
|||
|
|
|
|||
|
|
STEP# #OF DIGITS/RANGE DISPLAY DESCRIPTION
|
|||
|
|
|
|||
|
|
01 10 DIGITS Own# MIN (AREA CODE & PHONE NUMBER)
|
|||
|
|
02 5 DIGITS System ID SYSTEM ID
|
|||
|
|
03 4 DIGITS IPCH NO. IPCH AUTOMATICALLY SET
|
|||
|
|
04 2 DIGITS ACCOLCC ACCESS OVERLOAD
|
|||
|
|
05 2 DIGITS GIM GROUP ID (10 FOR USA)
|
|||
|
|
06 3 OR 4 DIGITS Unlock LOCK CODE
|
|||
|
|
07 4 DIGITS SCM STATION CLASS MARK, USE 1000.
|
|||
|
|
08 4 DIGITS/0 OR 1 OPTION OPTION BITS:
|
|||
|
|
1 enables, from left to right:
|
|||
|
|
MIN Mark
|
|||
|
|
Hands Free
|
|||
|
|
Local Use
|
|||
|
|
NOT USED
|
|||
|
|
9 6 DIGITS SECURITY SECURITY CODE (DEFAULT IS LAST
|
|||
|
|
SIX DIGITS OF ESN)
|
|||
|
|
|
|||
|
|
|
|||
|
|
LOCK: Press MENU until phone displays "LOCK PRESS 0" then 0 to lock.
|
|||
|
|
|
|||
|
|
UNLOCK: Enter lock code.
|