103 lines
4.7 KiB
Plaintext
103 lines
4.7 KiB
Plaintext
|
*****************************************************************************
|
||
|
*************************Quick information Cronicles*************************
|
||
|
*****************************************************************************
|
||
|
***********The Lamers Guide On How To Make A Redbox**************************
|
||
|
*****************************************************************************
|
||
|
***********Writen By Cyborg**************************************************
|
||
|
*****************************************************************************
|
||
|
|
||
|
|
||
|
Ok, So you want to make a red box. I'm going to give easy instructions on
|
||
|
how to make your own red box, fast and easy.
|
||
|
|
||
|
Things you will need:
|
||
|
1 6.49 or 6.50 MHZ crystal
|
||
|
1 Radio Shack Phone Dialer ( the 33 memory one)
|
||
|
1 Small Screwdriver and some electrical tape
|
||
|
1 soldering iron
|
||
|
|
||
|
All of these are easy to came by. The hardest thing to get is the 6.49MHZ
|
||
|
crystal. Even though 6.49 is the optimum crystal to use they have to be c
|
||
|
custom made and therfore are almost impossible to get. A 6.50 MHZ crystal
|
||
|
will work just as good as the 6.49 and is easier to get. If you don't
|
||
|
already know where to get the 6.50 crystal, you can order them from either
|
||
|
Mouser electronics (1-800-346-6873) or Digikey electronics (1-800-344-4539)
|
||
|
|
||
|
Ok, now that I've told you where to get the crystals, now on to how to put
|
||
|
the red box together
|
||
|
|
||
|
1. Take your Radio Shack Phone Dialer ( Both the old or newer modles will
|
||
|
work) and the screwdriver and unscrew all 6 of the screws holding the
|
||
|
phone dialer closed.
|
||
|
|
||
|
2. Once you have the phone dialer open look for a shiney canister shaped
|
||
|
thing under 3 disk capasitors. Take a flat head screwdriver and pry the
|
||
|
shiney canister off of the glued area.
|
||
|
|
||
|
3. Take your soldering iron and carefully use it to heat the solder that
|
||
|
is on the wires that hold the shiney canister in, and take it out.
|
||
|
|
||
|
4. Get out your 6.50 MHZ crystal and cut the ends of the wires on it so
|
||
|
it will fit into the phone dialer right.
|
||
|
|
||
|
5 solder the 6.50 MHZ crystal into the spot that the shiney canister was in,
|
||
|
then wrap the crystal in electrical tape so it wont short out the phone
|
||
|
dialer
|
||
|
|
||
|
6. If you are using a newer phone dialer you will need to pry off that
|
||
|
smaller disk shaped speaker on the area that is above where you just put
|
||
|
the crystal in. you can either remove it completley or just move it over so
|
||
|
the phone dialer will close easily.
|
||
|
|
||
|
7. Put the phone dialer back together, close the two sides making sure that
|
||
|
the switches don't fall out, and screw the 6 screws back into their places
|
||
|
|
||
|
8. Put battery's into the phone dialer and make sure that the tone's still
|
||
|
work ( if they don't you either didn't tape the crystal right or didn't
|
||
|
solder the crystal in right) the tones should sound high pitched compared
|
||
|
to normal touch tone phones.
|
||
|
|
||
|
9. Turn the switch to store. press memory, *****, pause, memory, P1
|
||
|
memory, *****, pause, *****, pause, memory, P2
|
||
|
memory, *****, pause, *****, pause, *****, pause, *****, pause, memory, P3
|
||
|
|
||
|
ok, you have mow set your priority buttons for (P1) $0.25, (P2) $0.50,
|
||
|
and (P3) $1.00
|
||
|
|
||
|
Now that you have finished making and setting your red box I will give you
|
||
|
some tip's how to get the best results with it.
|
||
|
|
||
|
1. Try not to use your red box in places with a lot of background noise
|
||
|
ie. Fairs, bowlingally's, etc.
|
||
|
|
||
|
2. If you ever get a live opperator, such as with GTE, just play along and
|
||
|
don't panic, They don't know that you arn't paying for the call
|
||
|
|
||
|
3. if you get an automated opperator, then it switches over to the live
|
||
|
operator, just ask how much more you owe. they will usauly tell you, then
|
||
|
just use the red box like you would normally with the normal automated
|
||
|
opperator.
|
||
|
|
||
|
4. The red box will work best with AT&T so when you are using your red box
|
||
|
always dial 1-0288-1-(AC) xxx-xxxx (10288 is easy to remember just think
|
||
|
10-ATT)
|
||
|
|
||
|
5. One final thing, the red box will not work on all payfones. Some phones
|
||
|
won't activate the mouthpeice untill you actually put money into the phone
|
||
|
you can easily recognize these phones by picking up the receiver and hanging
|
||
|
it back up again, if the phone clicks loudly when you hang up the receiver
|
||
|
then this is one of those phones and you can't redbox off of it, so mave
|
||
|
to another phone.
|
||
|
|
||
|
|
||
|
|
||
|
*****************************************************************************
|
||
|
Disclamer********************************************************************
|
||
|
*****************************************************************************
|
||
|
This file is for information purposes only, I am in no way responsible for
|
||
|
any illegal applications of this file.
|
||
|
*****************************************************************************
|
||
|
|
||
|
For more info contact Suburban Wasteland at (219) YOU-WISH
|
||
|
|