167 lines
6.8 KiB
Plaintext
167 lines
6.8 KiB
Plaintext
|
SEAGATE TECHNOLOGY, INC.
|
|||
|
Customer Technical Support FAX Network +1 408 438-8137
|
|||
|
Customer Technical Support Bulletin Boards (300-9600, 8-N-1)
|
|||
|
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ
|
|||
|
<EFBFBD> United States +1 408 438-8771 <20> United Kingdom +44 628 478011 <20>
|
|||
|
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ĵ
|
|||
|
<EFBFBD> Germany +49 89 140-9331 <20> Singapore +65 227-2217 <20>
|
|||
|
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
(C)opyright 1993
|
|||
|
|
|||
|
|
|||
|
|
|||
|
ST-31230W/WD/WC Fast Wide SCSI-2 (Hawk 2LP)
|
|||
|
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͻ
|
|||
|
<20> REAR VIEW <20> (ST-31230W/WD only)
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͼ
|
|||
|
(TOP) Auxiliary
|
|||
|
___________________ <20><><EFBFBD> <20>1<EFBFBD>/<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>\
|
|||
|
<20>( <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>1)ͳ::::::<3A><> 0 0 0 0 <20><>
|
|||
|
\<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ij<EFBFBD><C4B3><EFBFBD><EFBFBD>/ <20> <20><> <20><><EFBFBD>5<EFBFBD>G<EFBFBD>G<EFBFBD>12<31>
|
|||
|
68 pin I/O Cable<6C> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
Connection Male <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
Auxiliary option header <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
pin-11 +5v <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ٳ<EFBFBD><D9B3><EFBFBD><EFBFBD>
|
|||
|
pin-10 GND <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ٳ<EFBFBD><D9B3><EFBFBD>
|
|||
|
SCSI ID = 8 <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ٳ<EFBFBD><D9B3>
|
|||
|
SCSI ID = 4 <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ĵ<EFBFBD><C4B4>
|
|||
|
or pin-6 REFIND+ <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ٳ<EFBFBD>
|
|||
|
SCSI ID = 2 <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ٳ
|
|||
|
SCSI ID = 1 <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
SCSI ID = 0 (none)
|
|||
|
|
|||
|
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͻ
|
|||
|
<20> REAR VIEW <20> (ST-31230WC only)
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͼ
|
|||
|
80 pin I/O and DC Power Wall/bracket Connection
|
|||
|
<20> Female
|
|||
|
J1 /<2F><><EFBFBD>ij<EFBFBD><C4B3><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>\ TOP (HDA)
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>/ <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> \<5C><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
(\<5C>1<EFBFBD><31><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>40/) BOTTOM
|
|||
|
|
|||
|
Notes on 80 pin I/O connector:
|
|||
|
pins 1 - 4 = +12v 41 - 44 = 12v GND
|
|||
|
34 - 36 = +5v 74 - 76 = 5v GND
|
|||
|
37 = SYNC 77 = LEDC
|
|||
|
38 = MTRON 78 = DLYDST
|
|||
|
39 = SCSIA0 79 = SCSIA1
|
|||
|
40 = SCSIA2 80 = SCSIA3
|
|||
|
|
|||
|
Mating NC connector: AMP US p/n: 2-557103-1 straight-in, Male 80-pin
|
|||
|
2-557101-1 right angle to PCB
|
|||
|
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͻ
|
|||
|
<20> RIGHT SIDE VIEW <20> (Both ST-31230W and ST-31230WC)
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͼ
|
|||
|
|
|||
|
|
|||
|
BACK <20> J2 12345678 TOP (HDA) FRONT
|
|||
|
OF J1<4A><31><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>P<EFBFBD>W<EFBFBD>A<EFBFBD><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> OF
|
|||
|
DRIVE <20>; :::::::: BOTTOM DRIVE
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
<20>Terminator Power ٳ<><D9B3><EFBFBD><EFBFBD><EFBFBD><EFBFBD> Reserved
|
|||
|
ڴTerminator Power <20>ٳ<EFBFBD><D9B3><EFBFBD><EFBFBD><EFBFBD> Start Delay (12 secs * ID)
|
|||
|
<20> Enable T-Res <20><>ٳ<EFBFBD><D9B3><EFBFBD><EFBFBD> Motor Start
|
|||
|
<20> Parity Enable <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> Write Protect
|
|||
|
<20>
|
|||
|
<20>
|
|||
|
<20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ
|
|||
|
<20>Ĵ Termination Power-source Table <20>
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>....<2E><><EFBFBD><EFBFBD><EFBFBD>....<2E><><EFBFBD><EFBFBD><EFBFBD>PWA edge<67><65><EFBFBD><EFBFBD><EFBFBD> <20>
|
|||
|
<20> <20>
|
|||
|
<20> 1 2 1 2 1 2 <20>
|
|||
|
<20> <20>ķ <20>ķ A Drive Supplies Bus <20>
|
|||
|
<20> <20><><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD><EFBFBD> B Drive Supplies Own <20>
|
|||
|
<20> <20><><EFBFBD><EFBFBD> <20><><EFBFBD><EFBFBD> <20><> <20><> C Bus Supplies Drive <20>
|
|||
|
<20> A B C <20>
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Default<6C><74><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
Note: The model ST-31230WC drive cannot furnish terminator power,
|
|||
|
because no pins on the 80 pin I/O connector are devoted to terminator
|
|||
|
power.
|
|||
|
|
|||
|
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͻ
|
|||
|
<20> FRONT VIEW <20> (Both ST-31230W and ST-31230WC)
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ͼ
|
|||
|
|
|||
|
|
|||
|
TOP (HDA) J6 <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>1<EFBFBD>
|
|||
|
<20><>P<EFBFBD>W<EFBFBD>A<EFBFBD><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>͵::::::<3A><>
|
|||
|
* BOTTOM <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>;
|
|||
|
<20> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
LED <20><> <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
<20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
Auxiliary option header <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
pin-11 +5v <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ٳ<EFBFBD><D9B3><EFBFBD><EFBFBD>
|
|||
|
pin-10 GND <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ٳ<EFBFBD><D9B3><EFBFBD>
|
|||
|
SCSI ID = 8 <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ٳ<EFBFBD><D9B3>
|
|||
|
or pin-8 BUSY <20><><EFBFBD><EFBFBD><EFBFBD> <20><><EFBFBD>
|
|||
|
SCSI ID = 4 <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ٳ<EFBFBD>
|
|||
|
or pin-6 REFIND+ <20><> <20><>
|
|||
|
SCSI ID = 2 <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>ٳ
|
|||
|
SCSI ID = 1 <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
SCSI ID = 0 (none)
|
|||
|
|
|||
|
If these ID jumper are used, then
|
|||
|
ID jumpers shown in left side view J5
|
|||
|
or 80 pin I/O cable ARE NOT USED.
|
|||
|
|
|||
|
|
|||
|
ST-31230W
|
|||
|
Hawk 2LP
|
|||
|
|
|||
|
UNFORMATTED CAPACITY (MB) ________________1200
|
|||
|
FORMATTED CAPACITY (xx SECTORS) (MB) _____1050
|
|||
|
AVERAGE SECTORS PER TRACK ________________
|
|||
|
ACTUATOR TYPE ____________________________ROTARY VOICE COIL
|
|||
|
TRACKS ___________________________________
|
|||
|
CYLINDERS ________________________________3898
|
|||
|
HEADS ______PHYSICAL______________________5
|
|||
|
DISCS (3.5 in) ___________________________3
|
|||
|
MEDIA TYPE _______________________________THIN FILM
|
|||
|
RECORDING METHOD _________________________ZBR RLL (1,7)
|
|||
|
INTERNAL TRANSFER RATE (mbits/sec)________38 to 62
|
|||
|
EXTERNAL TRANSFER RATE (mbytes/sec)_______20 Sync.
|
|||
|
SPINDLE SPEED (RPM) ______________________5411
|
|||
|
AVERAGE LATENCY (mSEC) ___________________5.54
|
|||
|
BUFFER ___________________________________512 KByte
|
|||
|
Read Look-Ahead, Adaptive,
|
|||
|
Multi-Segmented Cache
|
|||
|
INTERFACE ________________________________SCSI-2 FAST Wide
|
|||
|
TPI (TRACKS PER INCH) ____________________
|
|||
|
AVERAGE ACCESS (ms) (read/write)__________9.3/10.5
|
|||
|
Drive level without controller overhead
|
|||
|
SINGLE TRACK SEEK (ms) (read/write)_______1.2/1.7
|
|||
|
MAX FULL SEEK (ms) (read/write)___________19.4/20.4
|
|||
|
MTBF (power-on hours) ____________________800,000
|
|||
|
POWER REQUIREMENTS: +12V START-UP (amps) _1.7
|
|||
|
+12V TYPICAL (amps) __0.36
|
|||
|
+5V START-UP (amps) __
|
|||
|
+5V TYPICAL (amps) ___0.54
|
|||
|
TYPICAL (watts) ______7
|
|||
|
MAXIMUM (watts) ______
|
|||
|
WRITE PRECOMP (cyl) ______________________N/A
|
|||
|
REDUCED WRITE CURRENT (cyl) ______________N/A
|
|||
|
LANDING ZONE (cyl) _______________________AUTO PARK
|
|||
|
IBM AT DRIVE TYPE ________________________0 or NONE
|
|||
|
|
|||
|
Physical:
|
|||
|
Height (inches/mm): 1.00/25.4
|
|||
|
Width (inches/mm): 4.02/102.1
|
|||
|
Depth (inches/mm): 5.77/146.6
|
|||
|
Weight (lbs/kg): 1.5/0.68
|
|||
|
|
|||
|
Already low-level formatted at the factory with 1 spare sector
|
|||
|
per track and 2 spare cylinders/unit.
|
|||
|
|
|||
|
ZBR = Zone Bit Recording = Variable sectors per track
|
|||
|
|
|||
|
Seagate reserves the right to change, without notice, product
|
|||
|
offerings or specifications. (08/09/94)
|