textfiles/anarchy/WEAPONS/blowgun.doc

71 lines
1.6 KiB
Plaintext
Raw Normal View History

2021-04-15 13:31:59 -05:00
Blowgun
---------
In this article we will attemt to explain the use and manufacture
of a powerfull blow-gun and making darts for the gun.
The possestion of the blow gun
described in this article IS a felony.
So be carefull where you use it. I dont want to get you all busted.
Needed:
1. Several strands of yarn (About
2 inches a piece)
2. A regular pencil
3. A 2 1/4 inch long needle
(hopefully with a beaded head.
If not obtainable,wrap tape
around end of needle.
4. 2-3 1/4 foot pipe. (PVC or
Aluminum) Half a inch in
diameter
Constructing the dart.
1st- Carefully twist and pull the
metal part (Along with eraser) of the
pencil till it comes off.
2nd- Take Pin and start putting about 5-7 Strands of yarn on the pin. Then
push them up to the top of the pin.
But not over the head of the pin (or
the tape).
3rd- Push pin through the hollow part of the head where the pencil was
before.
4th- That should for a nice looking
dart. (see illustration)
####\
#####>>>>>-----
####/
# is the yarn
> is the head of the pencil
- is the pin it-self
Using the Darts
1st- Now take the finished dart
and insert it in the tube (if it is
too small put on more yarn.)
2nd- Aim the tube at a door, wall,
sister, ect.
3rd- blow on the end of the pipe.
4th- Sometimes the end of the pipe
may be sharp. When this
happens I suggest you wrap it with
some black electrician tape.It should feel alot better.