161 lines
6.5 KiB
Plaintext
Raw Normal View History

2021-04-15 13:31:59 -05:00
<20><>DJ<44><4A>
EXPLOSiVES
- DECENT BOMBS FROM JIFFY MARKERS -
Anyone who has ever went to school MUST know what a Jiffy marker
is... Ya know, those little boxes of 3 inch markers... asstd. colors...
and you always went to use 'em in class to make posters and shit with but
they were all worn out and dead? yep.. Well next time just snag yourself
a couple of em... and follow these directions....
- The REAL BORiNG class after social or whatever... go and grab some
paperclips off of the teachers desk.
- Proceed to remove the marker lid... and unscrew the plastic part that
has the worn out tip thing in it...
- Take out the little clear plastic washer thingy... and then bend your
stolen paperclip into a hooky thingy so that you can wrench out the
fluffy ink thing from inside the marker...
- Chuck the fluffy ink thing at some lamer....
- Screw the marker back together... dont forget the plastic washer thingy...
and take your casing home... (Notice how HOLLOW and METALLiC your marker
seems, you can almost imagine it bursting into little pieces of shrapnel
as you sit there.
- OK... Decision time... I can think of 3 simple ways in which to use this
newly aquired casing....
1. MATCH HEAD bomb... (SiMPLE)
Just take a bunch of matches... grab some scissors... and proceed to
remove the heads from the matches... put the heads in the empty casing and
discard (or keep and make log cabins out of em) the match sticks...
Basically your done... cept for the fuse... Which will come later...
2. GUN\BLACK powder... (MoRE DiFFiCULT)
Ok... GUN\BLACK powder... Personally... id Buy decent Gun\Black powder,
But... not everyone has access to buying the stuff... so heres a quick
little recipie c\o THE PRECEPTOR -
iNGR<47>Di<44>NTS:Salt Peter (Used in pickling)
Aluminum Filings (Steal it from the I.A. Room)
Sugar
and a DAB of oil
MiX em together... put the dab of oil on the mixture...
there ya go....
But if you're gonna buy the best and most reactive powder to get is 4x
gun\black powder... if ya need help on places to buy it... call
M<>D and we'll give ya an address\name of place... Just stuff the marker
with the powder and you're almost done...Fuses still remain
separate near the end here...
3. MODEL ROCKET ENGiNE.. (EXPENSiVE)
Nuff said.. just buy or steal some rocket engines... and then cut em
up and take the shit you get... grind it up into fine powder... put it in
the marker casing and do the fuse thingy...
FUSES
THEORETICAL FUSeS USed...
STRiNG FUSE #1 (Taken from a TFiLE by DARK CREEPER 1986)
Material Required:
-----------------
<20><>
Soft Cotton String <20> Potassium Nitrate 25 parts
Fine Black Powder <20><><EFBFBD><EFBFBD><EFBFBD>> or Ĵ Charcoal 3 parts
Piece of Round Stick <20> Sulphur 2 parts
Two Pans or Dishes <20><>
Procedure:
---------
1. Moisten fine Black Powder to form a paste or prepare a
substitute as follows:
A. Dissolve Potassium Nitrate in an equal amount of
water.
B. Pulverize charcoal by spreading thinly on a hard
surface and rolling the round stick over it to crush to
fine powder.
C. Pulverise the sulphur in the sam manner.
D. Dry mix sulphur an charcoal.
E. Add Potassium Nitrate solution to dry mix to obtain
a thoroughly wet paste.
2. Twist of braid three strands of cotton string together.
3. Rub paste mixture into twisted string with fingers and
allow to dry.
4. Check the actual burning rate of the fuse by measuring the
time it takes for a known legth to burn. This is used to
determine the length needed for the desired time.
STRiNG FUSE #2
MATERIALS NEEDED...
YARN
WAX
BLACK\GUN POWDER (Fine Grain)
- Take the wax... melt it..
- Dip the string in the wax...
- Sprinkle Powder on the string.. .(it sticks to the wax..)
TAPE FUSE
MATERIALS NEEDED...
Scotch tape
GUN\BLACK POWDER (fine grain)
- take a LONG piece of tape...
- Sprinkle Powder on the sticky side...
- light it and run like hell..
(VERY fast Fuse)
THESE fuses.. Hard to get to work... BUT its not all you can try.
One would think that the felt tip which travels through the cap into the
opening would be a good fuse.. BUT its not.. .even when removed and soaked
in hard liquor it still wont remain lit through the opening in the cap.
BUT just remove the felt thingy... put the fuse through the hole so that
it will ignite the contents of your little BooMer...
Watch yourself and others when playing with these things.. and
the usual... if you blow your arm off while doin this.. I and <20>DJ<44> will not
be hld responsible... Have fun...
<20><><EFBFBD>
<20>HE LiZ<69>RD KiNG
(If you have any quetions you can reach me at EDJE HQ.. M<>D-(4o3)258-1o47
<20>DJ<44> DiST SiTES NeaR you (area code 4o3)
MUTU<54>LLY <20>SSUR<55>D D<>STRUCTiON 4o3-258-1o47 650+ PHACV TFiLES\ViRii
TH<54> <20>LF<4C>LM 4o3-253-8314 PiRATE and PHACV Stuff
"ANARCHY is THE BASiS of SoCiety, WiTHout it We'd BE iN ChAos"
- LoL
X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X
Another file downloaded from: The NIRVANAnet(tm) Seven
& the Temple of the Screaming Electron Taipan Enigma 510/935-5845
Burn This Flag Zardoz 408/363-9766
realitycheck Poindexter Fortran 510/527-1662
Lies Unlimited Mick Freen 801/278-2699
The New Dork Sublime Biffnix 415/864-DORK
The Shrine Rif Raf 206/794-6674
Planet Mirth Simon Jester 510/786-6560
"Raw Data for Raw Nerves"
X-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-X