61 lines
3.3 KiB
Plaintext
61 lines
3.3 KiB
Plaintext
![]() |
Project Verify
|
|||
|
by Fred Steinbeck
|
|||
|
|
|||
|
|
|||
|
I did some more research, and found that RING FWD doesn't send 90V out on the
|
|||
|
forward part of the loop. Instead, it disconnects the forward part of the loop
|
|||
|
from the position for a short period of time (less than 0.5 seconds). On an
|
|||
|
overseas call, this would make the inward operator's CLG light flash on and off,
|
|||
|
signaling her to stop doing her nails and get on with the call.
|
|||
|
|
|||
|
What this does to verify circuitry is anyone's guess. If the connection is
|
|||
|
long distance, the winking of the TSPS console would send 2600 Hz momentarily at
|
|||
|
the verify circuitry, which might be a possibility...
|
|||
|
|
|||
|
Anyway, operators generally don't use routing codes anymore, except in a few
|
|||
|
areas (I wish I knew of a few of them). Now what an operator does to verify or
|
|||
|
interrupt is the following:
|
|||
|
|
|||
|
Assume you have dialed 0+7D, and the 7D is the number you want verified. The
|
|||
|
operator then classes charge as "station paid" and hits VFY. If VFY lights, it
|
|||
|
means the number can be verified. She then presses HOLD on loop 1, and ACS
|
|||
|
(access) on loop 2. She then presses ST, which completes the verify call. If
|
|||
|
there is speech on the line, she will hear encrypted speech. Assuming so, she
|
|||
|
then hits EMER INT (emergency interrupt), tells them what's going on, and then
|
|||
|
hits REL FWD (release forward, which drops the call on loop 2). She then hits
|
|||
|
POS REL on loop 2, and ACS on loop 1, bringing her back to you. She then
|
|||
|
reports, hits REC MSG (record message, which charges you) and then POS REL,
|
|||
|
position release.
|
|||
|
|
|||
|
Most areas no longer have "TSPS Maintenance Engineers" or frame calling the
|
|||
|
operator. However, if you do, you might waht to try this. "Operator, class
|
|||
|
charge as station paid, and hit verify plus start. Now hit emergency interrupt,
|
|||
|
no AMA, and postion release." This should have the effect of throwing you into
|
|||
|
the call as a 3rd party, for free. I wouldn't do this from home, however,
|
|||
|
because when you call the operator, you are not free of her until she position
|
|||
|
releases. Therefore, if she gets suspicious, you can hang up, but it won't do
|
|||
|
you any good...
|
|||
|
|
|||
|
Paraphernalia
|
|||
|
|
|||
|
B & F Enterprises (P.O. Box 3357, Peabody, MA 01960), says Agent NDS, sells a
|
|||
|
"telephone loop pickup coil", for $4.88. I would assume it is much like the
|
|||
|
Trinetics PC-48 inductive coupler. I have not checked this place out, but it
|
|||
|
would seem to be a good deal.
|
|||
|
|
|||
|
Bay Technologies-(408)-737-8180 sells the NSC 800 series of microprocessors
|
|||
|
and support devices. To find a supplier closer to you, try calling National
|
|||
|
Semiconductor at (408)- 737-5000, and ask for your local distributor.
|
|||
|
|
|||
|
American Microsystems, Inc. (AMI) produces what they call the
|
|||
|
"Telecommunications Design Manual". This fine book, which is actually a
|
|||
|
combination of AMI semiconductors, circuit layouts, schematics, articles, and an
|
|||
|
informative glossary, can be had for the price of a call to (408)-246-0330.
|
|||
|
|
|||
|
Bell System locks are a special brand: BEST. They are what they claim to be.
|
|||
|
I have never met a person who could pick them. What to do? Take a hacksaw to
|
|||
|
the lock from the top and cut the doorknob off. Then throw the bolt with a
|
|||
|
screwdriver. It takes about 20 minutes, but it can be worth it.
|
|||
|
|
|||
|
Call The Works BBS - 1600+ Textfiles! - [914]/238-8195 - 300/1200 - Always Open
|
|||
|
|