informis
/
textfiles
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
textfiles/messages/qbbs_mess.txt

4612 lines
148 KiB
Plaintext
Raw Permalink Normal View History

Initial commit
2021-04-15 11:31:59 -07:00
Message #10182 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 14:46
From: Claude Warren
To: Barron Featherston
Subj: Re: Doorware Conference
Barron,
I was not attempting to yell at you. I guess it was just that everyone
expected to have the editors included in the release. As far as I know Adam
does not want to show faveritism and so will not include the full screen
editors in any package. Sorry if I looked like I was yelling at you. It
was unintensional.
However, I thought that you might like to know that SHEDIT will be
released soon. I am supposed to have the docs done by Wed so I would look
for it by the end of the week.
Claude
--- QuickBBS v2.00
* Origin: The Cyber-Zone: (303)860-0126 (1:104/61)
Message #10195 "QuickBBS"
Date: 12-Apr-88 13:55
From: Barron Featherston
To: Claude Warren
Subj: Re: Doorware Conference
Ok, I will keep an eye out for it. Since I run a Stand Alone BBS It would
help if you could give me some phone numbers of BBSes where I could get it.
When QBBS 2.00 came out I only had 3 numbers where I could get it and I only
had access on 2 of them. needless to say the 2 I had access to were busy all
day long! & The 3rd one would only give new users 5 min and 10k per day. Made
it a might difficult to DL the QBBS files!
As for thinking you were yelling, When you CAPATALIZE almost every other
word like you did it tends to convey the impression of anger. Sorry I
missunderstood.
Barron C. Featherston
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10196 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 14:12
From: Barron Featherston
To: George Vandervort
Subj: Re: PROTOCALS
> IF NOT, THEN * PLEASE * RECOMMEND A COMM PROGRAM THAT DOES
> WORK
> SOLID WITH YOUR PROTOCALS AT 2400 BAUD OR FASTER...
> PREFERABLY WITH SEALINK, ZMODEM,
> MLINK16 MEGALINK THANK YOU
> GEORGE VANDERVORT - 512-357-6904 2400 BAUD...
Qmodem SST 3.1a Allows you to install SeaLink, Zmodem, Mlink, Kermit & More
& I have not had ANY problems using the SeaLink or Zmodem Proticals with
QuickBBS! You can get the ARC's for Qmodem SST 3.1a from The Butler POLYMET
QuickBBS at (313)589-3974. Go To the Software area when you first logon.
(Command S from the main menu) New users have full access to the DownLoad
area and plenty of time to DL. If you wish access to the BBS area leave me a
message.
Barron C. Featherston
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10199 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 15:48
From: Chuck Rouzer
To: Adam Hudson
Subj: MODEM DIP SWITCHES
I am using QuickBBS v2.00 and when someone trys to use SHEDIT
it logs them off (or kicks them off). But the reason is I helped
someone fix his like that now I can't fix mine.
Also I wanted to know what the correct DIP SWITCH settings for
QBBS?
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10541 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 08:43
From: Vernon Six
To: Adam Hudson
Subj: LastRead Pointer
Per our phone conversation last evening, I am going to go back to the Beta
version of EchoGen and see if that solves the problem with the lastread
pointers.
It only seems to be messing up after tossing new echomail.
-=[ Vern ]=-
--- QuickBBS v2.00
* Origin: The Data Emporium BBS (tm) - FidoNet Region 19 Coordinator
(1:381/1)
Message #10582 "QuickBBS"
Date: 12-Apr-88 17:17
From: Cabell Clarke
To: Vernon Six
Subj: Re: Last Message Read Pointer Bug
I too am experiencing the "LASTREAD" bug.... I have found that it seems ok
until you use the msgpack -r to renumber the messages.... After renumbering,
the pointers are messed up again.
--- QuickBBS v2.00
* Origin: Boot Factory (1:13/19)
Message #10604 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 12:25
From: Larry Gilbert
To: Dennis D'annunzio
Subj: Re: Initialization
I hope 200 people don't beat me to answering this, but...
To force QuickBBS to exit to the batch file, you need to use the -e
option; for instance, to re-log the user after he/she has left the
BBS and wants back in, you need a line like "QuickBBS -R -E0" in your
batch file.
At least that's the way it works on *my* system.. but I only have
v1.00 ... anyone know where I can get an update? <eyebrow wiggle>
--- ConfMail V3.31
* Origin: TumbleWeed RBBS (1:103/700)
Message #10635 "QuickBBS"
Date: 13-Apr-88 15:43
From: Adam Hudson
To: Chuck Rouzer
Subj: Re: MODEM DIP SWITCHES
> I am using QuickBBS v2.00 and when someone trys to use
> SHEDIT
> it logs them off (or kicks them off). But the reason is I
> helped
> someone fix his like that now I can't fix mine.
This is the first of any problems I have heard about SHEDIT and QuickBBS
getting along. Simply place SHEDIT.EXE in your QuickBBS directory and enter
SHEDIT.EXE as the message editor string in QCONFIG. You should be all set
once you do those things!
Adam
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10639 "QuickBBS"
Date: 13-Apr-88 15:48
From: Adam Hudson
To: Barron Featherston
Subj: Re: QuickBBS Problem
The correct errorlevel statement I use in DOS is this:
IF ERRORLEVEL 45 GOTO QUIZ
IF ERRORLEVEL 1 GOTO START
The equals sign (=) may have been causing the problem.
Adam
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10640 "QuickBBS"
Date: 13-Apr-88 15:48
From: Adam Hudson
To: Doc Baba
Subj: Re: FILES
> after logging onto my board after converting to 2.00, I
> noticed that I had downloaded 65,535 files, so had a few
> users, can you please explain.
This is a bug in 2.00 and will be fixed in the 2.01 release due for the
15th.
Adam
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10649 "QuickBBS"
Date: 13-Apr-88 23:40
From: George Vandervort
To: Barron Featherston
Subj: Re: PROTOCALS
Thanks Barron for the Info...
I have down loaded most of QMODEM SST 3.1A FROM OTTO'S BBS
I'LL GIVE IT A TRY...
GEORGE VANDERVORT - LOUNGE LIZARD'S RETREAT - 512-357-6904 - 2400 BAUD
SOON TO BE 9600 HST
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10650 "QuickBBS"
Date: 13-Apr-88 23:41
From: Ray Patterson
To: All
Subj: net mail
Is there a way to make echogen or mailtoss or whatever toss net mail that's
not addressed to me to the net mail area? Whenever I get a message that's not
addressed to me it just deletes it. This concerns net mail only and not echo
mail............Thanks...........Ray
--- QuickBBS v2.00
* Origin: The Night Owl (307) 235-5207 Casper, WY (1:104/301)
Message #10651 "QuickBBS"
Date: 13-Apr-88 12:37
From: Greg Bell
To: John Hladun
Subj: Re: MAILTOSS
John, check your qconfig to make sure your net mail is goint to your net mail
area (menu option 2).
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #10653 "QuickBBS"
Date: 13-Apr-88 12:48
From: Greg Bell
To: Noel Crow
Subj: Re: QuickBBS v2.0!
Noel, Please check your qconfig menu option 2. there is a prompt there about
the middle of the page that allows you to specify where your netmail is
supose to go to...YOU DON"T HAVE TO SWAP OUT YOUR NETMAIL...
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #10654 "QuickBBS"
Date: 13-Apr-88 12:53
From: Greg Bell
To: Dave Boisvenu
Subj: Re: BBS List..
May I have a copy of the compiled list when you are through with it???
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #10655 "QuickBBS" (RECEIVED)
Date: 13-Apr-88 13:00
From: Greg Bell
To: Larry Snyder
Subj: Re: AUTOECHO & QuickBBS
I've been able to sucessfully request new echos using Autoecho from Vernon
Six (19/0). We had a bit of a problem at first, but got it straightened out
and it's working great...Might ask Vern about it though...
NOTE: When requesting a new echo, make sure you put a blank line at the end
of the request or you will get back some really wierd responces to your
request...
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #10656 "QuickBBS" (RECEIVED)
Date: 13-Apr-88 13:01
From: Greg Bell
To: Larry Snyder
Subj: Re: PKXARC
That's rather odd. I've got PKxarc & PKARC located in a C:\UTIL directory
and have been having no problems at all.
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #10657 "QuickBBS" (RECEIVED)
Date: 13-Apr-88 13:27
From: Greg Bell
To: Adam Hudson
Subj: wish list
Just some thoughts here.
1...a way to printout the list of the menu (menuedit)
2...blinking colors for menus.
3...a goto line-lable or gosub line-lable in the questionaire command
language.
4...the ability to change direction of read in mid step
5...the ability to look up in the user-list when getting ready to post a
message. (what would really make this option super is when the list is
printed, allow the user to enter a line number and the converts to the
name requested...Hmmmm)
6...status line, list how long user has left on system and what menu
they are in...
7...you have export of messages just fine, how about import and edit of
messages???
8...when exporting to printer...can we have a tof option?
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #10675 "QuickBBS"
Date: 14-Apr-88 05:16
From: Claude Warren
To: All
Subj: shedit
The long awaited Full screen editor is available from 104/51 for download or
file request. Request Shedit.
Claude
--- QuickBBS v2.00
* Origin: P2B2S - The other home of the QuickBBS Docs (1:104/51)
Message #10676 "QuickBBS" (RECEIVED)
Date: 13-Apr-88 19:53
From: Steven Radich
To: Gary Funk
Subj: Re: TRADEWARS RELEASES
Thanx..
--- QuickBBS v2.00
* Origin: DC Library BBS (EVI 19.2k), 1-301-292-0172 (DCWAS) (1:109/706)
Message #10677 "QuickBBS"
Date: 13-Apr-88 16:48
From: Cabell Clarke
To: Mike Janke
Subj: Re: Full screen editor
Better than 75% of my new users have 66 line screens... :-)
--- QuickBBS v2.00
* Origin: Boot Factory (1:13/19)
Message #10680 "QuickBBS"
Date: 14-Apr-88 05:50
From: Claude Warren
To: Barron Featherston
Subj: Re: Doorware Conference
> Alone BBS It would help if you could give me some phone
> numbers of BBSes where I could get it. When QBBS 2.00 came
SHEDIT is now available on 104/51 for download. The number is (303)
329-3337. This version seems to be quite well written.
Claude
--- SHEDIT v1.00--- QuickBBS v2.00
* Origin: Mojave Net. Quick, Out from between a WOC and a hard place
(1:104/62)
Message #10682 "QuickBBS" (RECEIVED)
Date: 14-Apr-88 05:59
From: Daniel Segard
To: Adam Hudson
Subj: Message Data Base
(For only being a user of QuickBBS and not a QuickBBS sysop, I sure do
ask alot of questions don't I?)
It used to be under 1.02 that when the user did a Type 22 check for
personal mail it would show all messages that were marked as being new since
the last session. Now it seems that once the user has read his mail at the
beginning of the session the switches are set off and the Type 22 no longer
works. As I recall on Version 1.02 the Type 22 could be run successfuly as
many times during the session as the user wanted. Now it can only be run
once (assuming that the user didn't read the mail when he first logged in.)
My personal preference would be for the new msgs to stay marked during the
entire session as they do in TBBS. Another option might be to add a question
to Type 22 asking the user if he wants to see the previously recieved mail as
well. But if you do that you might add the "Starting at msg number:" prompt
as well. Just suggestions.
There seems to be a problem with the user's last message read pointer.
I can log in here and recieve a bunch of new messages, read them, but then
when I go to read the rest of the messages in those areas QBBS will report
"No New Messages". Then I go to look for the last message that I really did
read and it will be 100 messages back in the base. I'm not sure what the
problem here is, but I can offer some ideas. Perhaps the pointer gets set as
the user reads messages? So that if the pointer is set at 4000 and the user
read a new msg at 6000 when he does a Read New it starts scanning at 6000
instead of 4000 as it should. Maybe? This would cause problems for the user
switching areas instead of doing a Read of combined boards (area 0). Or
perhaps the pointer is not getting set correctly when the message base goes
through its nightly pack and renumber? Any ideas?
--- QuickBBS v2.00
* Origin: The Cyber-Zone: (303)860-0126 (1:104/61)
Message #10693 "QuickBBS"
Date: 12-Apr-88 11:46
From: James Vanhouten
To: John Hladun
Subj: Re: MAILTOSS
Try MAILTOSS 03. Hope that works. You could always make your netmail area
01.. Later--Jim
P.S. My NETMAIL area is 19..
Jim
--- QuickBBS v2.00
* Origin: RRBBS - QuickBBS * QuickBBS * QuickBBS - (301) 736-0135
(1:109/722)
Message #10694 "QuickBBS"
Date: 12-Apr-88 11:49
From: James Vanhouten
To: Cabell Clarke
Subj: Re: Full screen editor
you can get EDED.ARC from here 1:109/722.0. Later
Jim
--- QuickBBS v2.00
* Origin: RRBBS - QuickBBS * QuickBBS * QuickBBS - (301) 736-0135
(1:109/722)
Message #10695 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 11:55
From: James Vanhouten
To: Adam Hudson
Subj: Re: MENUS
How about a file called MENUSEC.BBS that it checks for security.
(IE. Type 45 goto MENU Name, Check MENUSEC.)
MENUSEC.BBS
TOP 1
MAIL 1
GAMES 10
etc.
What do you think. The menusec file would only have to be present if the
sysop wants to user Menu Name.. Later--Jim
--- QuickBBS v2.00
* Origin: RRBBS - QuickBBS * QuickBBS * QuickBBS - (301) 736-0135
(1:109/722)
Message #10696 "QuickBBS"
Date: 13-Apr-88 20:27
From: Dana P'simer
To: All
Subj: SHEDIT
It's here! As of right now SHEDIT is officially released to the
public. If you would like a copy please F'Req it from me at 104/63 or from
Adam 104/24. The File to request is SHEDIT.ARC. Please, if any of you know
any one that is not on the net inform them of this. My BBS # is
(303)939-9272.
Thanks,
Dana P'Simer
--- QuickBBS v2.00
* Origin: Quicker than Ridin' a Camel Into the Wind -- Boulder, Co.
(1:104/63)
Message #10728 "QuickBBS"
Date: 12-Apr-88 14:30
From: William Prince
To: Mark Willecke
Subj: Re: ANSI Screens
Hi Mark,
.
I found a simple solution for 'short' ansi screens. I use XTPro for files
management and runni9ng the utility programs of QBBS as well as others. The
new XTPro has a built-in editor which I use to call up 'short' screens,
delete the 'blank' lines and resave. Works really trick. It is also VERY
usefule for quick changes to my LOGO.ASC and other ascii screens!
.
The PRINCE......AUTO-BBS 503-257-0423 (For the Automotive Enthusiast)
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #10729 "QuickBBS"
Date: 12-Apr-88 14:38
From: William Prince
To: Todd Gamel
Subj: Re: Zmodem BUG....
D I T T O Here too ..... AUTO-BBS
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #10730 "QuickBBS"
Date: 12-Apr-88 14:46
From: William Prince
To: All
Subj: Q-Basic 4.0/Q-BBS Interface Programming
Are their any QuickBasic 4.0 Programmers out there or others who can tell me
what is required to interface programs to run from Q-BBS from online. I want
to write some Automotive programs for my users to run while online with my
Q-BBS system (AUOT-BBS) for bothe entertainment and education. I would also
like to know if I can pass on the 'higher' screen modes for graphics.
.
Any input would be apreciated!
.
AUTRO-BBS 503-257-0423 Wm Prince Sysop
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #10731 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 17:43
From: Dale Weber
To: Rob Fletcher
Subj:
> Is Dutchie a Freeware or PD mailer?
As of v2.81 Dutchie is still semi-shareware meaning you have to send a
postcard to Henk Wevers to register it. Dutchie v3.0 will be commercial.
8-Dale
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #10732 "QuickBBS"
Date: 12-Apr-88 17:47
From: Willy Paine
To: All
Subj: RUNTIME ERROR!!!!
I am getting message file failure three times since first day of version
2.00. I am getting Runtime error 100 at 0000:07A3 after running mailscan. I
have lost total of 6 days of message include alot of QUICKBBS echos. I
might have to switch back to OPUS since my board might become big HUB board.
I need your help very badly. I am looking for tools to clean up bad message
in the file. My board is SeaEast PC Exchange 343/15. Thank you .... willy
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #10782 "QuickBBS"
Date: 13-Apr-88 12:09
From: Joe Arlt
To: Dave Boisvenu
Subj: Re: BBS List..
The National Classified BBS
1:141/310
203-377-6758
2400 8n1 24 hours Binkley/Quickbbs
Stratford Ct 06497
Sysop Joe Arlt
--- QuickBBS v2.00
* Origin: Chivalry QuickBBS -QUICKer'n WOC'n Denver (303) 699-0326
(1:104/46)
Message #10783 "QuickBBS"
Date: 13-Apr-88 17:48
From: Dax Davis
To: Barron Featherston
Subj: Re: QuickBBS Problem
Try re-writing the line as:
IF ERRORLEVEL 45 GOTO ????
??? is whatever the name is!!!
Dax
--- QuickBBS v2.00
* Origin: Chivalry QuickBBS -QUICKer'n WOC'n Denver (303) 699-0326
(1:104/46)
Message #10792 "QuickBBS"
Date: 14-Apr-88 08:23
From: Adam Hudson
To: Daniel Segard
Subj: Re: Message Data Base
> It used to be under 1.02 that when the user did a Type
> 22 check for personal mail it would show all messages that
> were marked as being new since the last session. Now it
> seems that once the user has read his mail at the beginning
> of the session the switches are set off and the Type 22 no
> longer works. As I recall on Version 1.02 the Type 22
> could be run successfuly as many times during the session
> as the user wanted. Now it can only be run once (assuming
> that the user didn't read the mail when he first logged
> in.) My personal preference would be for the new msgs to
Version 1.02 and Version 2.00 both work the same for a Type 22 personal mail
check. All it ever did was check for mail addressed to you that was NOT read
by you yet.
> There seems to be a problem with the user's last
> message read pointer. I can log in here and recieve a
This problem I am aware of and I am still working on it!
Adam
--- SHEDIT v1.00--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10793 "QuickBBS"
Date: 14-Apr-88 08:24
From: Adam Hudson
To: James Vanhouten
Subj: Re: MENUS
> What do you think. The menusec file would only have to be
> present if the sysop wants to user Menu Name.. Later--Jim
I will consider it! It's a GOOD suggestion!
Adam
--- SHEDIT v1.00--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10794 "QuickBBS" (RECEIVED)
Date: 14-Apr-88 08:26
From: Adam Hudson
To: Jeff Mouton
Subj: Re: Ver 2.0 Bug
> Found a bug in the USEREDIT program. If one uses tha
> ADDUSER function, a new record IS created but the USERPACK
> / USERSORT will error-fin with a Run Time Error of 100. If
> I find more I'll let you know. (P.S. The workaround I use,
> when I need to create a user record, is to logon in LOCAL
> mode and enter at the NEW User.
This is a real NASTY bug, I am fully aware of it and should be fixed in the
next release.
ATTENTION ALL: Do not use the ADD USER function of USEREDIT (F8 key)!!!
Adam
--- SHEDIT v1.00--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10805 "QuickBBS"
Date: 14-Apr-88 08:15
From: Jim Vorheis
To: Dale Weber
Subj: Re: ORIGIN LINE PROBLEMS
>> Do you happen to have BinkleyTerm 286 available for file
>> request? I am
>> very interested in the program...
>
> BT 286 is NOT an authorized version of BinkleyTerm. You
> should read the messages in BINKLEY from Both Vince
> Perrielo and Bob Hartman concerning this. I do not have it
> on my system at all but DO have BSRC_140.ARC if you want to
> try compiling it and creating your own BT 286.
I have used the BT-286 program on my Equity III+ (12MHz) and can say that
there seems to be no difference at all. Do read the Binkley Echomail
conference about using it. They talk about the technical aspects.
--- QuickBBS v2.00
* Origin: The Intermittent Connection Littleton, CO. (303)797-0296
(1:104/60)
Message #10806 "QuickBBS" (RECEIVED)
Date: 14-Apr-88 08:20
From: Jim Vorheis
To: Jeff Mouton
Subj: Re: Ver 2.0 Bug
> Found a bug in the USEREDIT program. If one uses tha
> ADDUSER function, a new record IS created but the USERPACK
> / USERSORT will error-fin with a Run Time Error of 100. If
> I find more I'll let you know. (P.S. The workaround I use,
> when I need to create a user record, is to logon in LOCAL
> mode and enter at the NEW User.
Well, I just tried this on-line after I read this message and had no
troubles adding a user and no Run Time Errors. I don't have alot of the
problems that others are reporting. The only 2 problems that I have are with
the lastread message pointers and with upgrading a user's access while he is
on-line, i.e., the user is logged off about 2 minutes later and upon looking
at his record with useredit, it shows 300+ minutes used.
--- QuickBBS v2.00
* Origin: The Intermittent Connection Littleton, CO. (303)797-0296
(1:104/60)
Message #10814 "QuickBBS"
Date: 14-Apr-88 18:18
From: Bob Herrin
To: Tony Bauman
Subj: Re: Viewing files
Thanks for the response. I would really appreciate it if you could locate the
file!! I'll check back here in a few days!
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10848 "QuickBBS" (RECEIVED)
Date: 14-Apr-88 10:56
From: Greg Bell
To: Bob Ransom
Subj: Re: Fatal System Error
Bob, you arn't the only one with that problem. I've been working with Chris
Brown here in Waco and he's run across the same exact problem with the same
exact error message. What's really strange however is that he had V2 up and
running for about 3 days prior to this happening. Now we cant get it to come
up at all under V2 and have had to fall back to V1.02.
What I suspect has happened in Chris's case is that one of the files that
got converted either didn't convert properly, or that he ran a version 1.02
program such as UEDIT on a version 2 USERS.BBS file.
Adam, Please list which files are effected by CONVERT so I can cross ref
this problem and see if by deleting these files and firing up V2 will correct
it.
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #10849 "QuickBBS"
Date: 15-Apr-88 07:58
From: Vernon Six
To: Greg Bell
Subj: Re: AUTOECHO & QuickBBS
RE: Wierd responses to AutoEcho
Adam has stated to me that he will be taking the tear line out of netmail
messages. This should solve the problem.
-=[ Vern ]=-
--- QuickBBS v2.00
* Origin: The Data Emporium BBS (tm) - FidoNet Region 19 Coordinator
(1:381/1)
Message #10850 "QuickBBS"
Date: 15-Apr-88 08:01
From: Vernon Six
To: Cabell Clarke
Subj: Re: Last Message Read Pointer Bug
Yes, Adam and I talked about the MsgPack utility and concluded that this is
where the bug is. IT now works fine. Adam will be releasing a new MsgPack
soon from whay he told me.
-=[ Vern ]=-
--- QuickBBS v2.00
* Origin: The Data Emporium BBS (tm) - FidoNet Region 19 Coordinator
(1:381/1)
Message #10853 "QuickBBS"
Date: 15-Apr-88 05:05
From: Cabell Clarke
To: Paul Papasavas
Subj: Re: Running Doorware on Ver 2.0
> One alternative is to make a batchfile that will copy
> the dorinfo file to dorinfo2.??? (I can't remember the
> extension).
>
> If that doesn't work, you might have something set wrong
> in your qconfig - Call Bob Wescott on his voice like at
> 1-603-424-6977 - He is the authro; he'll be able to help
Thanks... but I have since found the problem. I was running out of memory
after spawning QUick from Binkley. Thats why it worked fine in local - I
exit to Quick in local mode.
Thanks to all who provided help.
--- SHEDIT v1.00--- QuickBBS v2.00
* Origin: ===={ Boot Factory }==== (1:13/19)
Message #10856 "QuickBBS"
Date: 14-Apr-88 13:46
From: Dana P'simer
To: All
Subj: SHEDIT
OOOPS! I released SHEDIT with some bugs that I hadn't detected. They
are fixed now and any of you that have had trouble with SHEDIT kicking you
off, that problem should be fixed as well. The new version also supports the
IBM's extended keys ( the cursor pad ) as well as makes an attempt to handle
the VT-100 arrow keys in remote mode ( I have not had the chance to test this
but it should work <BIG GRIN> ). Please feel free to complain and send your
comments to me. Either though this Echo or by NetMail ( 1:104/63 ). I
cannot reply to everyone so please be patient, but be assured that your
message has been read and heeded.
Thank you for your support!
Dana P'Simer
CEO -- Shamaal Software, Inc.
Sysop of Into the Wind BBS -- 1:104/63 ( Data # (303)939-9272 )
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Quicker than Ridin' a Camel Into the Wind -- Boulder, Co.
(1:104/63)
Message #10857 "QuickBBS"
Date: 14-Apr-88 14:00
From: Dana P'simer
To: Bob Bradley
Subj: Re: SHEDIT
> I'm trying to locate a program for the local boards who use
> QuickBBS. I found version 2.0 for them, but have been asked
> if I could locate SHEDIT. Does anyone know what this is,
> and if I can get it thru PC Pursuit.
SHEDIT is a Full Screen Message Editor written by yours turely. This
message was written using SHEDIT. It is now available to Download and F'req
here at 104/63 under the name SHEDIT.ARC.
Please feel free to request it at any time or call in and download it.
Dana P'Simer
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Quicker than Ridin' a Camel Into the Wind -- Boulder, Co.
(1:104/63)
Message #10858 "QuickBBS"
Date: 14-Apr-88 14:15
From: Dana P'simer
To: Dale Weber
Subj: Re: Shedit and MS DOS 3.3.
>> If you're running MS DOS 3.3, don't expect to run SHEDIT
>> for a while. It resets the system. You will have MUCH
>> better luck with 3.2 or less. David Garrett [103/501]
> says
>> he is running it just fine with MS DOS 3.1.
>
> I'm running MS-DOS (NOT PC-DOS) v3.30 right now with
> SHEDIT and have not seen this RESET problem at all. Could
> it be a bug in the PC-DOS 3.30 version?
One, SHEDIT was developed using PC-DOS v3.3. Two, since it runs on
MS-DOS v3.3 I will assume that the gentelman claiming that SHEDIT wont run on
MS-DOS v3.3 is not running on standard hardware. Please if you have problems
with SHEDIT ( or any ShareWare product ) tell the author ( in this case me
), don't go makeing your own conclusions since you haven't even seen the
code. I am the expert on how SHEDIT runs, not you.
If this sounds like a flame, it isn't, although it really bothers me
when someone states facts that have no basis in reality.
Please direct all comments too me and thanks for your interest.
Dana P'Simer
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Quicker than Ridin' a Camel Into the Wind -- Boulder, Co.
(1:104/63)
Message #10859 "QuickBBS" (RECEIVED)
Date: 14-Apr-88 00:45
From: James Vanhouten
To: Adam Hudson
Subj: Re: PROTOCALS
Thanks. When can we look to get the new version <Grin>. Jim
--- QuickBBS v2.00
* Origin: RRBBS - QuickBBS * QuickBBS * QuickBBS - (301) 736-0135
(1:109/722)
Message #10873 "QuickBBS"
Date: 12-Apr-88 20:18
From: Don Menefee
To: Mike Janke
Subj: Re: Full screen editor
> What happens when one of these new users says yes and then
> goes to
> enter a message? I have not seen that happen YET, but I'm
> sure it will
> and I'm afraid it'll hang the system or they just won't be
> able to
> enter a message.
I've had it happen on One ocassion, a user did indeed answer Yes to the
full
screen editor (even though I had written a rather strong message in my new
user file stating NOT to use the full screen editor), what it did was
stayed
in the editor until I arrived to see it was down, after I locally exited
the
editor and it noticed the carrier drop and ran back to binkley and set up
properly.
I do have a solution although I havn't done it yet (got busy), but what I
might try is have two config files, one of them will have my editor dos
command string, the other will not. What I'll do is when I hit my F1 key in
binkley before going to local Quickbbs (ala Quickbbs -L), I'll rename my
appropriate config files so that it'll read locally with the editor, and
remote users will not get the editor option. I don't think this will cause
a problem that I know of, I've yet to try it though.
Don
--- QuickBBS v2.00
* Origin: NMC Sac_Ca. Running QuickBBS, not Wocing... (1:203/161)
Message #10874 "QuickBBS"
Date: 12-Apr-88 20:19
From: Don Menefee
To: Jim Vorheis
Subj: Re: Full screen editor
Yes this is true, I just happened to have a copy of eded local to try, so
I went with it, but yeah your right.--- QuickBBS v2.00
* Origin: NMC Sac_Ca. Running QuickBBS, not Wocing... (1:203/161)
Message #10875 "QuickBBS"
Date: 12-Apr-88 21:08
From: Don Menefee
To: Anyone...
Subj: Errorlevels in local
Can anyone tell me (ADAM?) if errorlevels work in local mode? I set a
errorlevel in local mode (Quickbbs -L -E5) in a attempt to have the system
check for outgoing mail (echo and net) when I log off, it does'nt appear to
work though, as soon as it exits (and quick does announce that when it
boots local that it'll exit with a errorlevel of 5) it just reboots binkley
and does'nt go through my Echogen and mailscan routines in my batch file,
my batches work fine if I log on remotely from my other system, but don't
seem to work local. I just want to know if I should check my batches some
more or if its a bug. Thanks.
PS Presently I just use a errorlevel F key out of binkley to check for mail
local after I log off local.
D
--- QuickBBS v2.00
* Origin: NMC Sac_Ca. Running QuickBBS, not Wocing... (1:203/161)
Message #10876 "QuickBBS"
Date: 13-Apr-88 07:43
From: David Rogers
To: Greg Bell
Subj: Re: Questionairre
Greg:
Thanks, I was reading docs for 1.02. Got it now. =Dave R.=
--- QuickBBS v2.00
* Origin: Techline BBS - WOK'n the DOG for dinner 617-758-4735 (1:322/860)
Message #10912 "QuickBBS"
Date: 14-Apr-88 18:34
From: Dana P'simer
To: All
Subj: SHEDIT : Clear Screen Problem
Some people have reported a clear screen problem and I have noticed
that although it doesn't happen on my computer ( I use NANSI.SYS ) in local
mode It does happen to me in remote mode. I have inserted a kludge that will
fix that and will be looking into getting it to work without the kludge. The
problem seems to be that the ANSI driver in use doesn't interpret the screen
clearing code correctly ( "ESC[2J" ). I know of no other way to clear the
screen using ANSI codes. If anyone can help me please feel free.
Please pick up the latest version from me at 104/63.
( that's (303)939-9272 )
Dana P'Simer
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Quicker than Ridin' a Camel Into the Wind -- Boulder, Co.
(1:104/63)
Message #10917 "QuickBBS" (RECEIVED)
Date: 15-Apr-88 03:57
From: Daniel Segard
To: Adam Hudson
Subj: Re: Message Data Base
.> Version 1.02 and Version 2.00 both work the same for a Type
.> 22 personal mail check. All it ever did was check for mail
.> addressed to you that was NOT read by you yet.
I must have remembered the way that it worked incorrectly. It would be
nice if it did just Mark the msgs like TBBS does so that they can be refered
to multiple times.
When doing a Read Selective on From, To or Subject, Quick starts with
the very first message in the area and starts scanning forward. It would be
nice if the user could narrow the search a little by putting in the msg
number to start the scan at.
And my recurring wish: it would be nice if the Editor commands
included A>gain so that the msg being replied to could be viewed again with
out saving the msg first.
--- QuickBBS v2.00
* Origin: The Cyber-Zone: (303)860-0126 (1:104/61)
Message #10940 "QuickBBS"
Date: 16-Apr-88 08:08
From: Jim Bolster
To: Dana P'simer
Subj: Re: SHEDIT
If this is version 1.0 that is fixed, I am still having a problem with it. I
get that log-off whenever I try to use it. Something about the quotes
buffer, it really flies by too fast to read. I'm running QuickBBS on an IBM
PC XT w/ a breakthru 286 board. I'm using DOS 3.3 and running X00 v1.09c (it
didn't work with 1.09b either). I have 640k memory with about 501k free
before loading up QuickBBS. I really want to be able to use this editor and
am baffled that some have no problems at all!
Just entering SHEDIT.EXE on the #3 area of QCONFIG and using the type 41
command is all there is too it, correct?
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10943 "QuickBBS"
Date: 16-Apr-88 08:38
From: Bob Ransom
To: Greg Bell
Subj: Re: Fatal System Error
Considering your answer, now I'm *really* baffled! I never had version 1.02
up.
q
> the same exact problem with the same exact error message.
> What's really strange however is that he had V2 up and
> running for about 3 days prior to this happening. Now we
> What I suspect has happened in Chris's case is that one of
> the files that got converted either didn't convert
> properly, or that he ran a version 1.02 program such as
> UEDIT on a version 2 USERS.BBS file.
What seems *really* odd to me is that I never had version 1.02 up --
hence, I've never run convert. My board is in the very early stages of
creation. Was following along in the doc file, after running the config
program, creating menus, etc. Got to the point where it says 'Power it up
for the first time.' But I've never been able to get it going. I thought
that maybe the system couldn't find the config file, so I copied to each and
every directory (just to be sure), but still get the same run-time error.
ARRGGHHHHHHHHH!!!! (Extreme frustration!)
Bob
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10945 "QuickBBS"
Date: 16-Apr-88 09:02
From: Don Menefee
To: Jim Vorheis
Subj: Re: Full screen editor
I was merely replying to a message that someone suggested I try Qedit,
if it was'nt you that suggested this my appology's. Although I'm sure I used
the Reply function which I havn't seen make mistakes.
Don
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #10949 "QuickBBS"
Date: 16-Apr-88 08:21
From: Vernon Six
To: Don Menefee
Subj: Re: Errorlevels in local
Yes, quite definitely ErrorLevels work in local mode. If you like, you can
File Request all my BATCH/CONTROL/CONFIG files with the filename of CONTROL.
You can also get ALL my menus (except one) with the filename of MENUS
Hope these help.
-=[ Vern ]=-
--- QuickBBS v2.00
* Origin: The Data Emporium BBS (tm) - FidoNet Region 19 Coordinator
(1:381/1)
Message #10950 "QuickBBS"
Date: 16-Apr-88 08:24
From: Vernon Six
To: Todd Gamel
Subj: HELP
Todd-
Can I assume that you have a copy of my batch files? One of the lines that
you show as part of Ommm processing, is generated by a file that I wrote
sometime ago. Just curious. If it is one of mine, I can probably help you.
How do you tell? If you are using a file called MASH.BAT it should have my
name in it. Let me know.
-=[ Vern ]=-
--- QuickBBS v2.00
* Origin: The Data Emporium BBS (tm) - FidoNet Region 19 Coordinator
(1:381/1)
Message #10999 "QuickBBS" (RECEIVED)
Date: 16-Apr-88 14:09
From: Gary Funk
To: Adam Hudson
Subj: qupd_201.arc
Where is the 2.01 update. I have file requested it several times and it
never comes through.
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11003 "QuickBBS"
Date: 16-Apr-88 15:47
From: Adam Hudson
To: Dave Boisvenu
Subj: Re: BBSlist
> Yeah, I know, I wrote that before I found out, Can I get in
> touch with him through the echo? I haven'tseen him (Or
> don't rememebr seeing). I might of, I'm in a daze right
> now, Just got done playing hockey fro 3 hours nonstop in a
> 80 degree gym in the getto..
Yes, you can get in touch which him through the echo...
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11004 "QuickBBS" (RECEIVED)
Date: 16-Apr-88 15:49
From: Adam Hudson
To: Larry Snyder
Subj: Re: bug/error when moving message
> Adam, When moving a message from one message area to
> another, the first number (1) off the message area number
> is left off (on the move to message area screen). Any
> message base over 100 is effected. The screen goes 99 then
> 00, 01 etc. for 100, 101...
Thanks! Will fix it!
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11005 "QuickBBS"
Date: 16-Apr-88 15:52
From: Adam Hudson
To: Mike Janke
Subj: Re: varied
> Why is it that <M>oving a message from one board to another
> tacks "On
> 1:0/0, Unlisted Node" on to the TO: and FROM: names? These
> have been
> moves from regular non-echo, non-netmail areas to other
> regular areas.
> Not a big problem, but it looks weird.
This is a bug... should be fixed in the next release.
> I'd also like to know if the "TIME LIMIT EXCEEDED, CALL
> BACK IN 24
> HOURS" thing that happens randomly (as I mentioned in
> netmail a few
> times) is a known bug or something that is only happening
> to me. If a
> bug, is there a fix in the works?
This only seems to happen when you move someone's security level up or down,
sometimes other places. I guess you can say it is random, that is why I am
having so much trouble tracking it down!
Adam
p.s. What are you using for a message editor?
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11006 "QuickBBS" (RECEIVED)
Date: 16-Apr-88 15:53
From: Adam Hudson
To: Larry Ciak
Subj: Re: QBBS Config
> Adam.. ARGH! I am having a dickens of a time.. maybe you
> can point me,.. what would make the QBBS not respond to an
> input from a remote terminal?. I can see the RD light
> indicating that it is getting the data to the Modem but
> after that.. it is as if QBBS doesn't read the comport..
> any ideas?
FOSSIL problem maybe? Try X00 v1.09c... (request X00V109C.ARC)...
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11007 "QuickBBS"
Date: 16-Apr-88 15:58
From: Adam Hudson
To: Curt Perryman
Subj: Re: ECHOKGEN.EXE
> Version 2.0 is great, am throughly enjoying using it
> without a hitch... well, maybe one. I got a virus type
> message, inserted by a new node in my group that just kept
> being passed around for days. This message was addressed
> to some 5 digit net/node that obviously doesn't exist like
> 12345/341234. I deleted it for days but it kept coming
> back and generating at times as many as 60 to 70 dupes of
> itself in my Binkley conference.
I am not sure what to say about this, do you think it is related to EchoGen?
> After reading the doc's I thought I'd try and run ECHOKDUP
> and see if that wasn't easier than manually deleting all
> those little buggers, but alas... there is no ECHOKDUP
> either in version 2.0's group nor in the old 1.02 QuickPAC.
> Is ECHOKDUP vaporware, and if not where to find it?
ECHOKDUP hasn't been changed to accomodate Version 2.00 structural changes.
Someday I will bring it back.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11008 "QuickBBS"
Date: 16-Apr-88 16:04
From: Adam Hudson
To: Nick Romero
Subj: Re: QBBS answer
> I have a serious problem here My modem will not answer the
> phone or accept the AT command 'F1' which it will normally
> take from a comm program. I had the same problem with v1..
> Your BBS system is the only one that has this problem with
> my modem (ComStar 2400i, made by Suntek). here is the set
> up-
> internal modem com2:
> S0=1 X1 V1 H0 M0 Z <---Will reset my modem to all other
> parms.
To my knowledge the Z on the end of the string will reset everything you
just told the modem. This could cause the modem to NOT answer the phone,
being that the default for S0 is 0.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11009 "QuickBBS"
Date: 16-Apr-88 16:06
From: Adam Hudson
To: Kevin Carr
Subj: Re: DORINFO1.DEF
> Hello.. I ran into some trouble trying to get some RBBS
> doors running correctly with the way you made the
> DORINFO1.DEF file. Will you put for the COM port, "COM0"
> like RBBS? Is there a reason why you just put COM1 there
> even when you run it in local?? Thanks.
Being that I do not know much about RBBS-PC, I was not aware of this. I
will make the change for the next release.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11010 "QuickBBS"
Date: 16-Apr-88 16:07
From: Adam Hudson
To: Daniel Segard
Subj: Re: Message Data Base
> I must have remembered the way that it worked
> incorrectly. It would be nice if it did just Mark the msgs
> like TBBS does so that they can be refered to multiple
> times.
QuickBBS does MARK the messages when it checks for mail...
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11013 "QuickBBS"
Date: 16-Apr-88 16:22
From: Adam Hudson
To: Everyone
Subj: QuickBBS 2.01
QuickBBS 2.01 DID NOT MAKE THE RELEASE!
IT WILL BE AVAILABLE ON MAY 1, 1988.
I AM SORRY FOR ANY INCONVIENCES THIS HAS MADE!
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11014 "QuickBBS"
Date: 16-Apr-88 16:47
From: Charlie Kron
To: Sysop
Subj: BBSlist
Hi Adam!
Well, I'm just about ready to switch my board over to QuickBBS but am
having one small problem before I can turn it loose. For the life of me I
can't get BBSLIST to run for me. I have tried to get it to run with a type 7
and a type 15 exit but am getting the same results in either case. The board
goes out to either shell or exit but it always comes back to the QuickBBS
menu. I have placed the BBSList file in the QuickBBS directory and have
entered on the menu line a type 7 with BBSLIST.EXE 2400 (just to test at that
speed). It just comes back to the menus. I have successfully gotten the
TODAY (semi-door to work) but, just can't seem to figure out BBSlist. Is it
me or is it the 1.02version of the BBSList? (Probably me). I'm running out
of ideas to try to get it to work. Any suggestions would be really
appreciated.
Hoping soon to have it figured out and up and running (with registration
fee soon to follow).
Thanks in advance for your help.
Charlie
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11031 "QuickBBS"
Date: 15-Apr-88 21:45
From: Jeff Balderson
To: David Rogers
Subj: Re: dups
DR> I am experiencing the same problems. The dupes are
DR> multiplying and no solution in sight. EchoKdup reports
DR> NO messages deleted, but when I go into the message
DR> area VOILA! they're crawling around all over the
DR> place. If you find a solution PLEASE let me know.
Are you adding the ^aPATH statements to your messages? (one of the options
of ECHOGEN adds them. -P I believe..) I had a problem with my boss sending
back messages that I wrote, but it stopped after I added that option above.
It also cured my problem with my private net address getting out into
FidoNet.
Jeff
--- ConfMail V3.31
* Origin: Lucky's Loony Bin: "Welcome to the electronic yoke.." (1:109/701)
Message #11032 "QuickBBS"
Date: 16-Apr-88 08:55
From: Steven Radich
To: Paul Papasavas
Subj: Re: Quick 2.00
Ok, and another advantage would be that we would know that anybody there can
help you, or needs help, with QuickBBS.
I'll be glad to be a gateway from Fido-Net to Quick-Net, if anybody does NOT
want to join Fido-Net..
--- QuickBBS v2.00
* Origin: DC Library BBS (EVI 19.2k), 1-301-292-0172 (DCWAS) (1:109/706)
Message #11039 "QuickBBS"
Date: 14-Apr-88 00:23
From: N N
To: All
Subj: DEAD?
ANY ONE OUT THERE? OR DID THIS BOARD DIE.
--- QuickBBS v2.00
* Origin: PEACOCKS NEST (1:9040/4)
Message #11255 "QuickBBS"
Date: 12-Apr-88 14:14
From: Terry Parker
To: Mike Janke
Subj: Re: varied
The "time limited exceeded" problem is NOT happening only to you, I've seen
several of my users zapped by it in the last few days. When I pull up their
user records, they have some huge amount of "time spent" in their record,
like 380 or so. I just "clear limits" to set it back to 0.
--- QuickBBS v2.00
* Origin: <20> The Devil's Advocate <20> 919-848-0901 <20> 2400 Baud <20> (1:151/117)
Message #11256 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 14:30
From: Terry Parker
To: Adam Hudson
Subj: Re: MENUS
How about an ability to call a menu and pass it a parameter?
For instance, instead of doing a type 2 menu call, you could do (for
example's sake) a type 45 and pass it the menu name and another piece of
data, as in "MSGSMENU 23". Then, in the menu, have a special character
designated as the "variable" to represent whatever data is passed to that
menu. For instance, you could use CTRL-B (since CTRL-A is already taken) and
place it in the
Optional Data area (along with anything else, but in this example, I'll just
use the CTRL-B by itself). Whatever data was next to the menu name i this
type 45 call would be substituted for all CTRL-B's found in that menu.
This would make it a heck of a lot easier for creating all those message
area R)ead, P)ost, S)can, etc... menus. You could make a generic one and
pass it the board number. Ideally, you would have at least a couple of
these variables, and they would work like a dos batch file. Maybe 3 of them
(I would think that would be enough to handle most things) and use
ctrl-b,ctrl-c,ctrl-d to represent the data passed to the menu in the Optional
Data area.
This would cut my number of menus at LEAST in half and make it a whole lot
easier to maintain and make changes to the message areas.
--- QuickBBS v2.00
* Origin: <20> The Devil's Advocate <20> 919-848-0901 <20> 2400 Baud <20> (1:151/117)
Message #11257 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 14:31
From: Terry Parker
To: Adam Hudson
Subj: Re: Ansi...
I have a couple of users that use terminal programs capable of interpreting
"ansi" (though there is no such thing) music. They have complained that
fairly often they will be going into a menu and get some "music" sent to
them. I never had this happen with the old version, yet one of my most
frequent users says it happens to him at least once every logon now with the
new version.
--- QuickBBS v2.00
* Origin: <20> The Devil's Advocate <20> 919-848-0901 <20> 2400 Baud <20> (1:151/117)
Message #11264 "QuickBBS"
Date: 12-Apr-88 04:12
From: Jim Watson
To: Rob Fletcher
Subj: Re: QuickBBS v2.0!
I've had the exact same problem with the newscan. my only recourse was to
delete the message base and start over ( Since I just put it up anyway, no
problem) After that, all of the scans seem to be working like a champ
--- QuickBBS v2.00
* Origin: CYBORG CONTROL! - Located in beautiful Austin, Texas (1:382/33)
Message #11265 "QuickBBS"
Date: 12-Apr-88 04:15
From: Jim Watson
To: Todd Gamel
Subj: Re: Zmodem BUG....
Another Zmodem bug is with the file calculations with *.* Each time I do
that, I get 0 files, 0 minutes, and it happily goes and gets the entire
directory. Current using what was called 2-22-88 on Adams board, but is dated
2-2-88
--- QuickBBS v2.00
* Origin: CYBORG CONTROL! - Located in beautiful Austin, Texas (1:382/33)
Message #11266 "QuickBBS"
Date: 12-Apr-88 10:16
From: Jim Watson
To: Dennis D'Annunzio
Subj: Re: Initialization
Do you have -E0 in your string to fire QuickBBS up? It won't exit back
to the batchfile unless you tell it to.
--- QuickBBS v2.00
* Origin: CYBORG CONTROL! - Located in beautiful Austin, Texas (1:382/33)
Message #11267 "QuickBBS"
Date: 12-Apr-88 21:38
From: Ron Hawkins
To: Mark Willecke
Subj: Re: ANSI Screens
Mark, if you use the "block save" option in THEDRAW, you can have your Ansi
screen the actual page length of the file you want, thus eliminating the
"blank" lines attached when using the "save" option.
--- QuickBBS v2.00
* Origin: NOVA - The "new" LONE STAR! - Austin, Texas (1:382/32)
Message #11268 "QuickBBS"
Date: 12-Apr-88 07:24
From: Thomas Lynch
To: Mark Willecke
Subj: Re: ANSI Screens
Mark-* I don't know Larry, but I use TheDraw all the time,
Mark-* I have heard of Another "ANSI" program that I might
Mark-* try and it is called ANSIPaint.
I have used ANSIpaint and The Draw and have had problems creating screens
with my NEC MUltisync/NEC(TSENG Labs) EGA card on a 12 Mhz 286. What I see
is not what I get after the file is saved. I have no explaination for this.
I have used used TDOODLE for ALL my PCBoard screens and menus, it takes up
less memory, less disk space and is very simple to use. (No animation, but a
polll of my users said they don't like watching a "neat" little screen
display every time they log on or as a menu) This is compounded by users
that log on at 300 to 9600 baud, what looks good to some is either too slow
or too fast to others.
--- ConfMail V3.31
* Origin: PHILLY VERTEX -=> Net150 Backbone (1:150/603)
Message #11269 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 06:06
From: Larry Snyder
To: Adam Hudson
Subj: Re: BEEP BEEP BEEP BEEP
Adam, How about an option from the message read menu to toggle on/off the
Seen By and Path lines?
--- QuickBBS v2.00
* Origin: Region 11 Echomail Coordinator, (219)25-80286 *HST* (1:227/1)
Message #11270 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 18:05
From: Larry Snyder
To: Adam Hudson
Subj: echogen error when un-packing mail
Adam, When Echogen is un-bundling mail and it comes across a bad packet,
Echogen will abort instead of continuing to un-bundle the other packets...
--- QuickBBS v2.00
* Origin: Region 11 Echomail Coordinator, (219)25-80286 *HST* (1:227/1)
Message #11271 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 18:49
From: Larry Snyder
To: Adam Hudson
Subj: message count
Adam, MsgPack stated "901 messages numbered 1 to 880" - how can this be?
--- QuickBBS v2.00
* Origin: Region 11 Echomail Coordinator, (219)25-80286 *HST* (1:227/1)
Message #11272 "QuickBBS"
Date: 12-Apr-88 21:32
From: Shawn Ingram
To: Mike Janke
Subj: Re: Full screen editor
I can relate to your problem with new users putting 66 Lines... Why do they
have that range???? I would have thought that they would have ranged up to
24 and if a more advanced user logged on, they should know that if you
answered no to pausing it wouldn't matter anyway!! I think that out of 30
users that I have had since I switched from OPUS to QuickBBS 2.0, at least 15
have used 66!!!
Who knows.....
Shawn Ingram, Sysop (226/100)
--- QuickBBS v2.00
* Origin: <20><><EFBFBD> The NEW Continental BBS, We WOC No Mo!, 614-863-9065 <20><><EFBFBD>
(1:226/1
Message #11273 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 21:46
From: Shawn Ingram
To: Adam Hudson
Subj: Re: BEEP BEEP BEEP BEEP
Adam,
I would like to congratulate you on a job well done.... I have been
using OPUS since March of last year, co-sysoping until February and taking
over sysoping since February.... I really like what you have done and am
looking forward to seeing 2.01....
I do have a couple of questions, though... What, if any, utilities
are available for QuickBBS???? What BBS Softwares' utilities may be
compatible (Fido, OPUS, RBBS, PCB, etc)???? And what would it take to become
a BETA test site.... I would like to help in any way that I can for the
upkeep of such a fine software package....
BTW, I will be sending registration in within the next week.. I
would like to get some additional responses from my former OPUS users on
their thoughts.... So far, everyone I have had the opportunity to chat with,
LOVE the way the software works.....
Thanks Again for your efforts.....
Shawn Ingram, Sysop (226/100)
--- QuickBBS v2.00
* Origin: <20><><EFBFBD> The NEW Continental BBS, We WOC No Mo!, 614-863-9065 <20><><EFBFBD>
(1:226/1
Message #11274 "QuickBBS"
Date: 12-Apr-88 21:48
From: Shawn Ingram
To: Joey Burgett
Subj: call
Joey,
I am also running QuickBBS now... If you would like to call my board
and see what you think of it the number is 614-863-9064.... I would be glad
to help you in any way that I can (although Jim has had a little more time to
master it).......
Good Luck,
Shawn Ingram, Sysop (226/100
--- QuickBBS v2.00
* Origin: <20><><EFBFBD> The NEW Continental BBS, We WOC No Mo!, 614-863-9065 <20><><EFBFBD>
(1:226/1
Message #11275 "QuickBBS"
Date: 12-Apr-88 21:52
From: Shawn Ingram
To: Jim Vaughan
Subj: Questions....
Jim,
I would like to get together with you sometime in the next couple of
weeks to get some ideas about what I can do with QuickBBS. From the Archives
that channelled through Barry to me, it seems as if you have been playing
around with it for a little while....
If you dont mind, send me netmail with a number or way I can reach
you or your hours of operation....
Thanks in advance,
Shawn....
--- QuickBBS v2.00
* Origin: <20><><EFBFBD> The NEW Continental BBS, We WOC No Mo!, 614-863-9065 <20><><EFBFBD>
(1:226/1
Message #11739 "QuickBBS"
Date: 14-Apr-88 00:24
From: Jim Vaughan
To: Shawn Ingram
Subj: Re: Questions....
I will be more than happy to help anyone in the Columbus area after the 17th.
I am tied up by to tight deadlines at work and I must have them done by this
weekend. I'm still trying to figure out how. I went out tonight for a couple
of hours just to clear my head and grasp hold of reality again before I get
pulled back under tomorrow. Give me a holler anytime after this weekend, my
board is up 24 hours/day normally, and can be reached at (614) 476-4967. I
will say this though, I would give serious thought to converting from
whatever you are running now to anything else. For what my opinion is worth,
the whole BBS software game over the last 7-8 months has been to see who can
come out with the mostest first and as a result, we, the Sysops of the world,
are having to suffer through bugs that are the result of hurrying to be
first. I know this is probably not the kind of message that everyone wants to
see in this echo, but like I said it is my opinion, based on my experience.
There may be others out there in modem land, and I'm very sure there are, who
love QuickBBS and wouldn't use anything else. Well, wait till the first time
they have a mail bundle tossed 4 times before they catch it. (Happened to me
today) Then have to go back and kill all the duplicates manually because the
killdups function doesn't seem to work properly. I know this may sound crazy
but it did happen and I hope to get a message in here to Adam Hudson sometime
tomorrow with details. I am honestly about ready to trash the idea of running
a BBS and just run BinkleyTerm and Confmail as a point to get the Conferences
I want to read and the heck with everything else. Sorry for the long
monologue but as you can see by the date/time mark it is late and I am really
miffed over the problems this package seems to have with EchoMail, especially
packets produced with ConfMail.
Later, Jim Vaughan
--- QuickBBS v2.00
* Origin: QUICKBBS Gild Aef Venteners: No WOC'ing, Just Quick Adventur
(1:226/2
Message #11740 "QuickBBS"
Date: 13-Apr-88 17:47
From: Jim Vaughan
To: Mike Janke
Subj: Re: varied
I have started having the same problem with the TIME LIMIT EXCEEDED comment
and being logged off without any prior notice. To say that it is frustrating
is being kind. If it is something you and I are doing wrong I would think
that somebody would have an answer for what would cause this problem. I have
tried everything from changes to the LIMITS.CTL file to creating a completely
new USERS.BBS file. It appears to only happen to user #0 (Sysop). I haven't
had any of my users complain about this happening.
Later, Jim Vaughan
--- QuickBBS v2.00
* Origin: QUICKBBS Gild Aef Venteners: No WOC'ing, Just Quick Adventur
(1:226/2
Message #11741 "QuickBBS"
Date: 13-Apr-88 06:36
From: Larry Snyder
To: Greg Bell
Subj: Re: Full screen editor
EDED is FREQ here as EDED*.ARC anytime except during NMH...
--- QuickBBS v2.00
* Origin: Region 11 Echomail Coordinator, (219)25-80286 *HST* (1:227/1)
Message #11742 "QuickBBS" (RECEIVED)
Date: 13-Apr-88 07:08
From: Larry Snyder
To: Adam Hudson
Subj: msgutils kill -d option
Adam, Does kill by date option (-d) take the date the message was entered on
the original system or the date that the message entered my system?
--- QuickBBS v2.00
* Origin: Region 11 Echomail Coordinator, (219)25-80286 *HST* (1:227/1)
Message #11743 "QuickBBS"
Date: 12-Apr-88 03:37
From: Keith Medcalf
To: Larry Snyder
Subj: AUTOECHO & QuickBBS
It will work with the QuickBBS formatted Areas.BBS file. Setup as follows
and it will work:
SET AUTOECHO=c:\autoecho
cd \quickbbs
echogen -U -T -P -Z ........
copy areas.bbs \autoecho\areas.bbs
cd \autoecho
autoecho
copy areas.bbs \quickbbs\areas.bbs
cd \quickbbs
MailToss -K
oMMM ......
etc.....
Make sure you create a SYSTEM1.BBS file in the AutoEcho directory that has
the Message Path set to wherever you told Quick the Matrix Message Areas
were. Make sure you set the message type to MATRIX/Net Mail.
Make sure you run AutoEcho AFTER EchoGen and BEFORE MailToss. BEFORE
MailScan and EchoGen (scan), and in all cases before oMMM.
This worked fine here (after I created the SYSTEM1.BBS file with the proper
NetMail message path in it, and put it, AutoEcho, and the AREAS.BBS files in
the subdir pointed to by the AUTOECHO environment variable.
Keith Medcalf
Canadian EchoHUB Relay I
--- ConfMail V3.31
* Origin: Symbiotic Systems  Mail Relay I  (416)465-1018 HST (1:148/218)
Message #11744 "QuickBBS"
Date: 12-Apr-88 03:52
From: Keith Medcalf
To: Mike Janke
Subj: Re: Tear Lines
>> Anyone know how to get rid of the f*cking tear lines off
>> the
>> MATRIX messages? THey render a wonderful program totally
>> useless, as you have to use DUTCHED to enter a real matrix
>> message.
>>
>> I thought that Adam took this stupid crap out in 1.02, but
>> I see that it is back and screwing everything up all over again.
>
> Your language and attitude really stinks and I for one do not like to
> have unnecessary, thinly disguised, foul language in my message areas.
> I didn't see YOUR name in REGISTER.LST. In MY opinion, if you haven't
> registered you don't even have the right to complain. Why not grow up
> a little and maybe you'll get a resonable answer to your problems...
> which apparently are more than QuickBBS related.
>
So far I have not seen a product that is satisfactory for paying the $25
for. Verison 1.02 was almost totally useless, and after testing it for a
SHORT period of time, Quick 1.02 was deleted forever from my system. If I
cannot use it I am not going to register it! What are you, a loogan or
something?
Secondly, I installed 2.00 when I finally managed to get a copy after
release, and quite a few of the problems that it had with 1.02 have been
fixed, however there are EXTREMELY SERIOUS FLAWS IN THE PROGRAM THAT IN MY
HUMBLE OPINION MAKE IT UNUSABLE IN MY PARTICULAR CASE. For that reason you
can expect that I shall not register it until those problems have been fixed.
To enumerate the idiocies and non-FTSC crap that QuickBBS does but should
not:
1) It MUST NOT put sh*t at the end of a MATRIX message. Tear lines are
for echomail messages, not netmail. I hate the bippity-bop flippancy
with
which this has been added and subtracted from version to version. One
minute it is there, the next it is gone. Anyone tossing the coin to
see
if it is fixed in the next version?
2) The stupid fucker stops sending data when the modem drops the CTS line.
Yet it insists that it does fossil I/O. Since it is THE RESPONSIBILITY
OF THE FOSSIL DRIVER AND ONLY THE FOSSIL DRIVER TO DO ALL HANDSHAKING,
WHAT THE FUCK IS THIS LITTLE TURD DOING EVEN LOOKING AT THE FUCKING
MODEM
CONTROL REGISTER? If Adam needs help accessing the Fossil Driver
correctly, I have a WHOLE LIBRARY of Turbo Pascal 4.0 routines that do
FOSSIL revision 4 and 5 I/O properly.
3) The program seems to inspect the MCR all the time and doing crap that
it should not be, yet at importandt times (like when it is trying to
download), the shitter just sits there idly waiting for a char to come
in
even after the caller has hung up! Whatsa matter, forget to check the
carrier, or just forget to detect the message from the Fossil that
carrier was dropped?
4) See previous posts for more problems with it!
Keith Medcalf "Waiting for the next version"
--- ConfMail V3.31
* Origin: Symbiotic Systems  Mail Relay I  (416)465-1018 HST (1:148/218)
Message #11745 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 04:13
From: Keith Medcalf
To: Adam Hudson
Subj: Re: BEEP BEEP BEEP BEEP
>> Another serious ANNOYANCE with the EchoGen is that it makes
>> an infernal racket when operating in secure mode, and it
>> tosses a packet which contains untossable messages (-G -N options).
> This looks to be a bug and will be fixed, if I can duplicate it...
Thank-you, All the further info I can give you is that the EchoGen looks
like it is trying to display the AREA:xxxxxx line from the top of the
message, however it appears to be displaying several extra characters from
the message(?) before it. It usually produces anywhere from 5 to 30 IBM
graphics chars intermixed with beeps and bells, and occasionally other ASCII
control codes. I have compared the junk to the message contents, but can't
seem to find a match-up for it.
>> Also, how are we coming along with getting rid of that silly
>> gunk off the end of the Matrix messages? If you really insist,
>> you can put it as a configurable option so that people who do NOT
>> wish to have their messages FTSC compatible can have it :-)
> I have removed it from my version (2.01 alpha), it should be released
> within 5 days from now.
Thanks again. That covers the major complaints. I know that alot of people
will be happy with that option (especially everyone who runs AutoEcho and
Server, or has to communicate with one :-) ).
Other problems, how do I force Quick to not stop sending data whenever the
modem drops CTS. As you know, with a locked DTE/DCE with the HST of 19200
baud, the data goes from the fossil to the modem in 64 byte (1/2 modem
buffer) blocks. I have 16K buffers in the fossil, and there is no reason
Quick can't pump them full of data and let the fossil handle the CTS like it
has been told to by the B,0,19200 option. It just needlesly degrades the
performance of the entire system (when I run at 14Mhz with a 1600K disk cache
and it ALMOST goes as fast as OPUS 1.03b running at 8Mhz under DESQview, 512K
cache, with a Local Opus reading/writing messages, a Clippered application
madly working on a 1M database, and an MBP Cobol Compile running all at the
same time under DESQview.)
Keith Medcalf
Canadian EchoHUB Relay I
--- ConfMail V3.31
* Origin: Symbiotic Systems  Mail Relay I  (416)465-1018 HST (1:148/218)
Message #11746 "QuickBBS" (RECEIVED)
Date: 12-Apr-88 04:15
From: Keith Medcalf
To: Adam Hudson
Subj: By the way ...
Is there any way that I can tell QuickBBS to run my MSG*.BBS files on
another drive? I want it to put them on the E: drive, while all the rest of
it is on the D drive. C is the system and my stuff, and F is the Files
Areas. Can you think of a way to manage that?
Keith
--- ConfMail V3.31
* Origin: Symbiotic Systems  Mail Relay I  (416)465-1018 HST (1:148/218)
Message #11747 "QuickBBS"
Date: 13-Apr-88 08:50
From: Bob Rudolph
To: Mike Janke
Subj: Re: Tear Lines
I have run QuickBBS using SEAdog, Dutchie, and FrontDoor, both 1.02 and 2.00
of QuickBBS, and the tear lines have never caused me any grief in netmail
messages. They go out as they should and work just fine.
I do not see why it matters. Callint it "stupid crap" without stating
specifically what the deleterious effects are is childish at best.
Bob
--- QuickBBS v2.00
* Origin: SystemHouse LINK FrontDoor/QuickBBS (1:261/999)
Message #11749 "QuickBBS"
Date: 12-Apr-88 18:56
From: Kirk Paddock
To: All
Subj: DSZ Problem
When changing over to Vesion 2.0 from version 1.X, be sure to change all type
32 option fields and REMOVE the last backslash from the file pathname.. I
chased this particular Problem for almost a week so Figured that I would just
drop this little tidbit to assist other syops who run into the 'OOPS, no
Zmodem' when they upgrade the V2.0.
KP
--- QuickBBS v2.00
* Origin: The INFINITE T.A.R.D.I.S. (British alt. Science Fiction)
(1:343/23)
Message #11750 "QuickBBS"
Date: 13-Apr-88 10:22
From: Tony Davis
To: All
Subj: Tossing
I have run into a "seemed" problem with ECHOGEN. A lot of people are useing
SIRIUS to respond to messages in the net. When one of these messages come to
a QUICKBBS 2.0 system Echogen will handle it correctly and send it on to
other systems, but will not import it into the BBS itself. The problem is
really with the SIRIUS user, they don't have it configured right to add the
ORIGIN Line as well as the SIRIUS Tag line, but it is such a widespread
mis-setup that Quick will have to be able to handle it. With to 60 or so
echoes I handle, 30 to 40 messages a day are not tossed.
Adam, I would appreciate a response I can post in the National SIRIUS Echo.
Thank You
Tony Davis
--- QuickBBS v2.00
* Origin: TELECO USA - Oklahoma City, Oklahoma - (405)670-4400 (1:147/22)
Message #11751 "QuickBBS" (RECEIVED)
Date: 13-Apr-88 10:31
From: Tony Davis
To: Adam Hudson
Subj: Wish List
A feature I would like to have in a Future update is the ability for all new
uploads to be checked against the same file we use for name and file searches
to notify the user that the file is already on the BBS to stop duplicate
uploads.
Thanks
Tony Davis
--- QuickBBS v2.00
* Origin: TELECO USA - Oklahoma City, Oklahoma - (405)670-4400 (1:147/22)
Message #11945 "QuickBBS"
Date: 14-Apr-88 22:30
From: William Prince
To: All
Subj: aDAM'S sUPPORT bOARD
Anyone know what happened to Adam's Support BBS tonday and tonite? I called
early today and got hung up attempting a multi-file SEALOINK D/L and since
then have called back 8 times, got connected, then nothing! Just a blank
screen. Sure hope I didn't hurt his system trying a SEALINK xfer.
.
Scary huh, or maybe he took it offline, but then shouldn't it ring 'busy'?
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #11948 "QuickBBS" (RECEIVED)
Date: 17-Apr-88 04:57
From: Cindy Bartorillo
To: Adam Hudson
Subj: qbbs 2.00
Adam,
In addition to all the problems I see noted in previous messages, we
are experiencing other problems:
1. Whenever a caller "pulls the plug" instead of logging off normally, the
board crashes (didn't happen in 1.02). This is no big thing, since we run the
board through a recycle batch file. The only problem is that the time used
that day in the USERS.BBS file is set to 0.
2. Download limits are not checked for Zmodem or SEAlink. Apparently Ymodem
works just fine. This was a problem in 1.02 also. In conjunction, the bytes
downloaded that day, in the USERS.BBS file, is not updated for Zmodem and
SEAlink transfers.
3. User's time used being set to some high number and time used that day
display set to something like 65535. We had this occur twice, both times when
a user was returning from a batch Zmodem transfer.
4. Screen does not clear after log off, causing the new fossil driver
messages to be printed on top of the last user screen (problem did not exist
1.02).
--Cindy & Drew Bartorillo--
The BAUDLINE II 301-694-7108
The BAUDLINE Too 301-694-3684
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #11949 "QuickBBS"
Date: 16-Apr-88 15:46
From: Greg Bell
To: Bill Heiser
Subj: Re: My board doesn't know *me* ! ! !
> My Quickbbs v1.02 doesn't seem to know who I am!!! When a user tries
> to enter a message to "sysop", the user is told that "that name"
> doesn't exist on the board! I have my name listed in the qconfig
> setup. Anyone else ever seen this?
It may be listed in the Qconfig or config.bbs file, but is your name in the
users.bbs file?
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #11950 "QuickBBS"
Date: 16-Apr-88 16:06
From: Greg Bell
To: Dale Weber
Subj: Re: system.log
> I think what we really need is a good remote pager that
> allows us to print the log if logged in locally ONLY. I'll
> have to see what I can find in the P/D for such uses.
You bring up a very valid point/possibility. Say Adam, is there a
possibility of creating a few menu types that are only valid if you are
logged in localy...these would be used for Sysop Maintance and such.
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #11951 "QuickBBS"
Date: 16-Apr-88 13:20
From: Greg Bell
To: Dale Weber
Subj: Re: SHEDIT.ARC
>> Alright, Who Has This Program???
>
> Only Beta Sites have SHEDIT at this time - it hasn't
> been officially released yet (at least not that -I- know
> of).
>
> 8-Dale
The above message was entered at 10am on april 3rd. Did a system go down
for nearly two weeks? I'm just now receiving this message into my system.
8-Dale, I've been impatiently patiently waiting for the release of SHEDIT.
I am using EDED in the local mode until SHEDIT is released.
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #11952 "QuickBBS"
Date: 16-Apr-88 13:32
From: Greg Bell
To: Curt Perryman
Subj: Re: SHEDIT.ARC
> SHEDIT.ARC is F-requestable from 124/301.
> Far Fields (214) 597-0080
> NOT PC-Pursuitable but ya can't have everything.
>
> Also available:
> QEXE_200.ARC QDOC_200.ARC QNET_200.ARC
>
> Doorware (which works great with QuickBBS v2.0)
> MONI0288.arc CAVE0288.arc CIA0288.arc KING0288.arc
> CHES0288.arc ARAB0288.arc MARS0288.arc TW5A0388.arc
> TW5B0288.arc
Shame on you...You just discribed to me a Candy Store...Watch out, HERE I
COME!!!
copy...copy...copy
or is that
f-req...f-req...f-req...
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #11953 "QuickBBS"
Date: 16-Apr-88 13:55
From: Greg Bell
To: Dave Boisvenu
Subj: Re: BBS List...
Dave, Here are two QuickBBS boards that are actually in the net. There are
two more, One that is running on a two floppy/256k machine and another that
will be set up in about a week or two. I'll forward their names as soon as I
get the info myself.
STARRCO Q-BBS MERLYN'S CASTLE
Greg S.S. Bell Chris Brown
(817) 756-3210 (817) 867-0821
(19/21) (19/29)
24 hours 5pm-7am (sometimes 24hrs)
PS: You might want to check your system date/time. The message I'm
responding to is date/time stamped as january 1st 1980.
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #11954 "QuickBBS"
Date: 16-Apr-88 13:57
From: Greg Bell
To: Cabell Clarke
Subj: Re: Full screen editor
> Better than 75% of my new users have 66 line screens... :-)
Sounds like my users...(most of them are MS-DOS users too...Hmmmmm)
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #11955 "QuickBBS"
Date: 16-Apr-88 14:02
From: Greg Bell
To: Dale Weber
Subj: Re: OMMM
> P.S. I've also got AMAX_102.ARC available with the rest
> for F/Req. It's a nifty utility to handle F/Req, F/Att, and
> general Outbound Area management specifically for
> BinkleyTerm.
AMAX_102.arc, is this anything like OOPS?
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #11956 "QuickBBS"
Date: 16-Apr-88 19:26
From: Mike Neal
To: John Hladun
Subj: Re: MAILTOSS
> Could someone tell me how to specify the message board
> number in MAILTOSS? Mine keeps tossing it into message area
> 1 while I keep telling it to put it into 3 like so
> "MAILTOSS 3". Is that not right? Is it a bug? I dunno...
> ---John
> * Origin: -=DASH*NET=- System # 2 (1:225/406)
John -
If you are using v 2.00, then you need not put a 3 after MAILTOSS.
Simply tell QuickBBS (by using QConfig) that your Net Mail board is # 3.
That seeeeeeeems to work just fine for me. Hope this helps .....
<20><><EFBFBD> Mike ۲<>
--- QuickBBS v2.00
* Origin: QuickBBS Support From Off The Flight Deck (1:5400/1)
Message #11957 "QuickBBS"
Date: 16-Apr-88 19:36
From: Mike Neal
To: Robb Topolski
Subj: Re: How do you...
> Hi...
>
> I'm using QuickBBS 2.00 with Echogen and Binkley. A friend
> has asked me to forward an echo to his board and send all
> the existing messages along now. Seems echogen does fine
> forwarding newly received messages, but how do I forward
> messages already existing in the message base?
>
> Thanks for any help.
>
> Robb Topolski
> Radio Free Arizona (602)890-0182 PCPursuit AZPHO 1:114/25
> * Origin: Chivalry QuickBBS -QUICKer'n WOC'n Denver (303)
> 699-0326 (1:104/46)
GOOOOOOOOOOOOOOOOD Question !!!!!!!!!!!!!!!!!!!!!!!!!!!!
If you find out, please send the solution my way, too ! <Grin>
Thanks !!!
<20><><EFBFBD> Mike ۲<>
--- QuickBBS v2.00
* Origin: QuickBBS Support From Off The Flight Deck (1:5400/1)
Message #11964 "QuickBBS"
Date: 16-Apr-88 08:39
From: Cabell Clarke
To: Mike Janke
Subj: Re: varied
> I'd also like to know if the "TIME LIMIT EXCEEDED, CALL
> BACK IN 24
> HOURS" thing that happens randomly (as I mentioned in
it is happening randomly to me... I have not been able to see any pattern to
it at all.
--- SHEDIT v1.00--- QuickBBS v2.00
* Origin: ===={ Boot Factory }==== (1:13/19)
Message #11965 "QuickBBS"
Date: 16-Apr-88 08:49
From: Cabell Clarke
To: All
Subj: ECHOTOSS/ECHOKDUP
I am looking for the old ECHOTOSS and ECHOKDUP programs... I have deleted all
of my old Quick 1.0x stuff and was wondering if anyone had the programs
available for file request?
Thanks.
--- SHEDIT v1.00--- QuickBBS v2.00
* Origin: ===={ Boot Factory }==== (1:13/19)
Message #11966 "QuickBBS"
Date: 16-Apr-88 14:44
From: Cabell Clarke
To: All
Subj: POSSIBLE BUG
hmm.. I wonder if anyone has seen this phenomena in echomail yet. I have
twice (that I know of) tossed inbound echomail, and gone to the message area
to read the new messages and seen this... it looks as if the new message was
tossed over top of an older message. What I will get is the Origin Line of
the new message then text from an older message adn then the origin line of
the older message like this:
---
Origin: New Message etc etc.
body of text from older message - it is always from a different message area
- never the same area that the new message was tossed into.
then:
---
Origin: Old Message etc etc
END OF MESSAGE
anyone else seen this phenomena?
--- SHEDIT v1.00--- QuickBBS v2.00
* Origin: ===={ Boot Factory }==== (1:13/19)
Message #11967 "QuickBBS" (RECEIVED)
Date: 15-Apr-88 22:17
From: Ryan Sells
To: Adam Hudson
Subj: Re: Menus
Why not use something like FLSEARCH.CTL called, say, MJSEC.CTL?
Ryan
--- QuickBBS v2.00
* Origin: The Gravity Well QBBS : (707) 426-0511 : Fairfield, Ca (1:161/6)
Message #11968 "QuickBBS"
Date: 15-Apr-88 22:24
From: Ryan Sells
To: Ray Patterson
Subj: Re: Qnode
QNODE works GREAT with PARSELST! I have been using Parselst for the past
few weeks, and it has done wonders for my control of Binkley....
Ryan
--- QuickBBS v2.00
* Origin: The Gravity Well QBBS : (707) 426-0511 : Fairfield, Ca (1:161/6)
Message #11969 "QuickBBS"
Date: 15-Apr-88 20:00
From: Dwayne Rich
To: Mike Janke
Subj: Re: Full screen editor
Hi Mike What do you have on the editor command line in the qconfig file to
call Qedit.I can't seem to get qedit to work.
Dwayne
--- QuickBBS v2.00
* Origin: Advanced Life Support BBS Cary,North Carolina (919)460-0586
(1:364/70
Message #11970 "QuickBBS"
Date: 15-Apr-88 11:30
From: Dan Brown
To: Dave Boisvenu
Subj: Re: Type 40
Thanks Dave! I appreciate the feedback on the Type 40's... All in all, I
love the new type 40 option, I just thought perhaps I was doing something
incorrectly with its implimentation.
Dan Brown
--- QuickBBS v2.00
* Origin: NMC Sac_Ca. Running QuickBBS, not Wocing... (1:203/161)
Message #11971 "QuickBBS" (RECEIVED)
Date: 15-Apr-88 11:32
From: Dan Brown
To: Adam Hudson
Subj: ASCII Protocol
Out of curiosity, what happened to the ASCII transfer option? I never really
had an occasion to use it, (or my users), just wondering.
--- QuickBBS v2.00
* Origin: NMC Sac_Ca. Running QuickBBS, not Wocing... (1:203/161)
Message #11972 "QuickBBS"
Date: 16-Apr-88 09:19
From: Barron Featherston
To: Kelly Drown
Subj: Re: DSZ/HST/Bink
> Zmodem was'nt the problem after all (but it did'nt work
> anyway). I have'nt been able to pinpoint a pattern
Hmmm.... I haven't had ANY problems with ZMODEM or the Time on Bug. Since
I'm a Stand alone BBS maybe the Bug is connected to the Net/Echo Mail code in
some way????
Barron Featherston
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Author of Doorware 603-424-5497 (1:132/114)
Message #11973 "QuickBBS"
Date: 16-Apr-88 09:30
From: Barron Featherston
To: Keith Medcalf
Subj: Re: Tear Lines
Watch that foul mouth of yours!
Just because YOU are having problems with something is NO REASON to post
that kind of GARBAGE!
There are LOTS of QuickBBS systems running with LITTLE or NO problems! So
blaming the program for all your problems is a NOT the way to go! Perhapst
You are not setting it up right or your modem is not configured right.
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Author of Doorware 603-424-5497 (1:132/114)
Message #11974 "QuickBBS"
Date: 16-Apr-88 14:56
From: Joe Terwilliger
To: All
Subj: help with email
As far as I new the E-Mail selection in the message base configuration area
allowed the user to enclose a file with the message when he closes it. I
don't see any difference to this selection and the Both selection. Can
someone tell me the difference?
Also: How do you print a "goodbye" file when you logoff? Is there a
special name for it? My version just logs off with no adui (is that how you
spell it?) I would like to be able to leave them with a short file. I have
seen it done before.
Does anybody know where I can get a FOSSIL driver that has ringback?
Joe T.
--- QuickBBS v2.00
* Origin: Techline BBS - WOK'n the DOG for dinner 617-758-4735 (1:322/860)
Message #11975 "QuickBBS"
Date: 13-Apr-88 17:00
From: Don Menefee
To: Don Menefee
Subj: Re: Errorlevels in local
To answer my own message, I found the problem, something real stupid
in my batch file....Always find the problem after the help message gets
shipped out.--- QuickBBS v2.00
* Origin: NMC Sac_Ca. Running QuickBBS, not Wocing... (1:203/161)
Message #11977 "QuickBBS"
Date: 14-Apr-88 09:52
From: Bob Westcott
To: All Sysop's
Subj: Door's
Here is a list of all available doors from my system:
Stateline BBS (very Quick)
132/114
9600 baud HST
TW5A0388.ARC Tradewars 500 1 of 2
TW5B0288.ARC Tradewars 500 2 of 2
TW1KQ.ARC Tradewars 1000 1 of 2
TW1KSUPQ.ARC Tradewars 1000 2 of 2
CAST0288.ARC Castle
RiPP0288.ARC Ripper
BBSL0288.ARC BBS listing
TIME0388.ARC Time adventure
CAVE0288.ARC Cave Multi-user game
MARS0288.ARC Mars adventure
ALPH0288.ARC Alpha adventure
MONI0288.ARC Monitor for doors (does not monitor carrier)
CHES0288.ARC Chess Player versus Player
PIRA0388.ARC Pirate Multi user game
REVE0288.ARC Reversing number game.
ARAB0288.ARC Arab adventure
ADVE0288.ARC Age old Adventure game
SWOR0288.ARC Sword Adventure
CRAZ0288.ARC Crazy Adventure
ROVE0288.ARC Rover game
ATLA0288.ARC Atlantis Adventure
AROU0288.ARC Around the world 80 days adventure
KILL0288.ARC Killer game
CIA0288.ARC C.I.A. Adventure
CHAT0288.ARC Eliza door
KING0388.ARC Trivia Multi user game
All above doors can be File requested or D/L from my system.
Bob...
--- QuickBBS v2.00
* Origin: Author of Doorware 603-424-5497 (1:132/114)
Message #11978 "QuickBBS"
Date: 14-Apr-88 08:27
From: David Rogers
To: Joey Burgett
Subj: Re: Help!
Joey:
Use FILES=20 in your config.sys. That should eliminate the FATAL error I
think. =Dave R.= 322/860
--- QuickBBS v2.00
* Origin: Techline BBS - WOK'n the DOG for dinner 617-758-4735 (1:322/860)
Message #11979 "QuickBBS"
Date: 14-Apr-88 08:32
From: David Rogers
To: Greg Bell
Subj: Re: SCREEN WIDTH
Greg:
Try adding files=20 to the CONFIG.SYS. It worked for me.
=Dave R.= 322/860
--- QuickBBS v2.00
* Origin: Techline BBS - WOK'n the DOG for dinner 617-758-4735 (1:322/860)
Message #11984 "QuickBBS"
Date: 12-Apr-88 07:57
From: Kelly Drown
To: Noel Crow
Subj: Re: DSZ/HST/Bink
> I had the same problem with a user who's record showed he
> had used 349
> minutes, but the log showed he was logged on for 10
> minutes. But I'm
> not running Zmodem, something else caused it.
Well, I trashed my Zmodem protocol because I thought it was the culprit
since the error occured directley after using or attempting to use it, or at
least it might have had something to do with it... But the "bug" has
re-occured again and someone else's log got 6+ hours added on, so Zmodem
was'nt the problem after all (but it did'nt work anyway). I have'nt been able
to pinpoint a pattern associated with the "bug", it seems to happen at
random, although so far, it has happened only to people who have not logged
in for at least a couple weeks-has'nt bothered the active users yet. I have
put a message on my opening screen pertaining to that "bug" in hopes that
users won't think the sysop is the one who's logging them off.
<sigh>
--- Kelly Drown
--- QuickBBS v2.00
* Origin: Desktop Publisher's Forum (918-234-8261) After 5:00pm (1:170/206)
Message #11985 "QuickBBS"
Date: 12-Apr-88 16:27
From: Nick Romero
To: Paul Papasavas
Subj: Re: QBBS answer
Yoo...
.
that is not what it was but i got it figured out!
my modem was not acutally recieving the S0=1 nor anything else for that
matter (well mabye somthing sice it was replying). first of all my modem does
not like the CR before the INI. string it has to be removed. The other was
the way my CONFIG.SYS was set up. I was messing with a multi tasker and it
re-did my config to suit it I was forced to go back and put X00.SYS back in
and other stuff. the order in wich you install some things affects
operations. X00.sys has to come last or for some reason on my machine (a
clone) the modem does not always recive the commands. this is my theory. now
it accept everything!
.
Nick Romero
--- QuickBBS v2.00
* Origin: Tulsa Lampoon - Is he really only 15 years old? (1:389/0)
Message #11987 "QuickBBS"
Date: 13-Apr-88 07:10
From: Paul Papasavas
To: Steve Lin
Subj: Re: File request
> I'd like to File Request from you (via PCOH2), but I need
> to know if you're using a USR HST 9600 or something else...
> My boss system can only File Request other systems with USR
> HST.
The ONLY things file requestable RIGHT now is ALL quickbbs software - One
of my drives will be put back in about a week due to a couple of minor
problems. Yes, I do run on an HST
--- QuickBBS v2.00
* Origin: The Parthenon - Quickbbs/9600/Binkley - Perfect Combo!
(1:107/337)
Message #11988 "QuickBBS"
Date: 13-Apr-88 07:29
From: Ted Brace
To: Steven Radich
Subj: Re: QuickBBS crashes
See Adam's messages to me (What a relief to me, I have only 60+ menus,
but...)
Ted
--- QuickBBS v2.00
* Origin: Odyssey Systems BBS -|- Canandaigua, New York -|- (1:260/212)
Message #11989 "QuickBBS"
Date: 13-Apr-88 18:20
From: Ryan Sells
To: All
Subj: QuickBBS Support files
Seeing as how I have received many requests lately for QQUOTES, I figure you
all might be interested in a complete listing of QBBS support files that are
unique to the Gravity Well. All may be F.REQed from here (161/6) as I am
using BT v1.40.
QQUOTES Quick quoter door (v1.01)
QMSTAT Automatically generates a bulletin describing your
message bases (v1.00)
QGUE Globally change up to 9 different security levels at
once (v1.10)
NEDIT MAIL.SYS editor which also edits netmail-related stuff
from your CONFIG.BBS file for QBBS. (v3.00)
.
Ryan
--- QuickBBS v2.00
* Origin: The Gravity Well QBBS : (707) 426-0511 : Fairfield, Ca (1:161/6)
Message #11990 "QuickBBS"
Date: 14-Apr-88 17:16
From: Don Menefee
To: Greg Bell
Subj: Re: Full screen editor
> It would be nice if you guys who are running EDED.EXE and
> QEDIT would let the rest of us know if these programs are
> f-requestable and if so, by what name.
If you can't find anyone closer you may FREQ the file from me as:
EDED.ARC
D. Menefee
203/161
Sac, Ca.
--- QuickBBS v2.00
* Origin: NMC Sac_Ca. Running QuickBBS, not Wocing... (1:203/161)
Message #11991 "QuickBBS"
Date: 14-Apr-88 15:16
From: David Rogers
To: Larry Snyder
Subj: Re: AUTOECHO & QuickBBS
Larry,
My Echo coordinator uses AUTOECHO. You might try giving him a call. He's
at 322/1. =Dave R.=
--- QuickBBS v2.00
* Origin: Techline BBS - WOK'n the DOG for dinner 617-758-4735 (1:322/860)
Message #11992 "QuickBBS"
Date: 15-Apr-88 10:56
From: Bob Westcott
To: Keith Medcalf
Subj: Re: Tear Lines
Keith:
I have no problem with you listing your problems with QuickBBS my problem is
language like yours is why we will lose the PRIVILEGE to have a BBS on the
telephone lines. If you think that having BBS is a RIGHT you are badly
mistaking as it is only a privilege. If you follow the news on the F.C.C. you
will find that they are under a LOT of pressure to get us out of the BBS's
and get rid of us.
With people like you using that type of language (which by the way is
illegal per F.C.C. laws) we will lose this fine hobby. So if you can find it
in your view PLEASE use the english language in a manner that will let me
continue to have a BBS operating.
Yes, F.C.C. does have some control over the telephone company.
Thanks for reading this.
Bob Westcott...
--- QuickBBS v2.00
* Origin: Author of Doorware 603-424-5497 (1:132/114)
Message #11993 "QuickBBS"
Date: 12-Apr-88 07:39
From: Peter Vernaglia
To: Noel Crow
Subj: Re: QuickBBS v2.0!
What! I toss mail to board 27...
--- QuickBBS v2.00
* Origin: Base 10 + PCBNet + (617) 721-7360 [PCP MABOS] (1:101/149)
Message #11994 "QuickBBS" (RECEIVED)
Date: 14-Apr-88 19:53
From: Paul Papasavas
To: Larry Ciak
Subj: Re: QBBS Config
> Adam.. ARGH! I am having a dickens of a time.. maybe you
> can point me,.. what would make the QBBS not respond to an
> input from a remote terminal?. I can see the RD light
> indicating that it is getting the data to the Modem but
> after that.. it is as if QBBS doesn't read the comport..
> any ideas?
> Thanks..
It is not Adam's fault - It is YOUR fault - It is the init string you have
- I had the same probelm when I ws a new HST owner - Call my board and
download hstset.arc - Hope that helps.
--- QuickBBS v2.00
* Origin: The Parthenon - Quickbbs/9600/Binkley - Perfect Combo!
(1:107/337)
Message #11995 "QuickBBS"
Date: 14-Apr-88 19:54
From: Paul Papasavas
To: Bill Heiser
Subj: Re: testing new connection
> --- QuickBBS v1.02
Get the new version if you are having problems.
--- QuickBBS v2.00
* Origin: The Parthenon - Quickbbs/9600/Binkley - Perfect Combo!
(1:107/337)
Message #11997 "QuickBBS"
Date: 12-Apr-88 07:11
From: Kevin Carr
To: Curt Perryman
Subj: Re: SHEDIT.ARC
ok Great. Well, I have PIRA????.ARC, KING????.ARC, CAVE????.ARC, and
BBSL????.ARC. I also some others made for RBBS, but that work fine on
QuickBBS.
--- QuickBBS v2.00
* Origin: The QuickBBS Phantom {!DFW's 1st QuickBBS!} [PCP 8PM-8AM ]
(1:124/209
Message #12227 "QuickBBS"
Date: 13-Apr-88 01:10
From: Dennis D'annunzio
To: Terry Parker
Subj: Re: varied
Same problem here. It seems random (and a little embarresing), but sure
enough, every now and then "time limit exceded" pops up. Kind of a pain, but
it's not TOO big of a problem.
--- QuickBBS v2.00
* Origin: The Chatter Box -- Charlotte, Nc (704)552-6971 (1:151/207)
Message #12230 "QuickBBS"
Date: 12-Apr-88 05:56
From: Mike Janke
To: Thomas Baker
Subj: Re: varied
> I've had that "TIME LIMIT EXCEEDED" happen to me quite a
> bit. I don't have any idea why because as the sysop, I
> NEVER get to use the system <grin>.
I'm glad it's not just me. I hadn't seen anyone mention it and I
thought that I was gonna have to figure this one out myself!
--- QuickBBS v2.00
* Origin: Kendall BBS (Why WOC when you can Fly!) (305) 271-2146 (1:135/4)
Message #12231 "QuickBBS"
Date: 12-Apr-88 11:25
From: Mike Janke
To: Rob Fletcher
Subj: Re: Full Screen Editor
> If you are tired of waiting for the full screen editor,
> just use EDED. It only works in local mode, but it works
> GREAT.
Don't forget to advise anyone that tries this that they better tell
Qconfig that Ansi graphics are not available, but allow the user to
toggle them on once logged on. If you have an editor declared in
Qconfig, and you have ANSI allowed, Quick will ask any new user that
says yes to ansi graphics if they want to use the full screen editor.
THen, when they go to enter a message it's a guaranteed lock up for a
remote user.
--- QuickBBS v2.00
* Origin: Kendall BBS (Why WOC when you can Fly!) (305) 271-2146 (1:135/4)
Message #12232 "QuickBBS"
Date: 12-Apr-88 11:28
From: Mike Janke
To: Noel Crow
Subj: Re: QuickBBS v2.0!
> The new version of Mailtoss won't accept a command line
> parameter to tell it which message base to toss to like the
> old one did... It tosses to #1 regardless. You'll have to
> swap out whatever is in #1 with your netmail base.
Not true. The board number for netmail is set up in Qconfig now, not
on the MAILTOSS command line like previous versions.
--- QuickBBS v2.00
* Origin: Kendall BBS (Why WOC when you can Fly!) (305) 271-2146 (1:135/4)
Message #12233 "QuickBBS"
Date: 13-Apr-88 15:39
From: Mike Janke
To: Terry Parker
Subj: Re: varied
> The "time limited exceeded" problem is NOT happening only
> to you, I've seen several of my users zapped by it in the
> last few days. When I pull up their user records, they
> have some huge amount of "time spent" in their record, like
> 380 or so. I just "clear limits" to set it back to 0.
I've noticed the same amount of time spent. It usually exceeds 300
minutes. Sometimes as much as 400 minutes appears in that field.
--- QuickBBS v2.00
* Origin: Kendall BBS (Why WOC when you can Fly!) (305) 271-2146 (1:135/4)
Message #12234 "QuickBBS"
Date: 13-Apr-88 16:01
From: Mike Janke
To: Terry Parker
Subj: Re: Ansi...
> I have a couple of users that use terminal programs capable
> of interpreting "ansi" (though there is no such thing)
> music.
Oh yes there is such a thing as Ansi music. In fact, I just saw a
program somewhere (didn't bother with it) for creating ansi screens
with music for use on bbs's, and I if I'm not mistaken, there was a
system around here that had a collection of ansi pictures with music.
--- QuickBBS v2.00
* Origin: Kendall BBS (Why WOC when you can Fly!) (305) 271-2146 (1:135/4)
Message #12235 "QuickBBS"
Date: 13-Apr-88 16:11
From: Mike Janke
To: Mark Willecke
Subj: Re: ANSI Screens
> The only drawback that I don't care for is that when you
> create a file, it creates it for the whole screen (24
> lines) so if you have just a few lines, you have extra. (I
> just go in and re-edit the smaller files with Qedit)
> I have heard of Another "ANSI" program that I might try and
> it is called ANSIPaint.
One of the reasons I always like THEDRAW over any of the other ansi
editors was it's abiltity to save a portion of the screen. Maybe
you're missing something (or creating animated screens which must be
saved in full). Next time try this. Create the screen, hit ALT-B to
mark the portion of the screen you want to do something with and when
you mark the end of the block, THEDRAW will ask you if you want to
"M)ove, C)opy, S)ave... etc.". Hit S and and you can save just the
portion you block marked. The "S)ave" option won't appear if you're
creating an animated screen or more accurately, it won't appear if you
are in ANImated mode (shown at the bottom) even if the screen you're
creating does not contain any animation.
--- QuickBBS v2.00
* Origin: Kendall BBS (Why WOC when you can Fly!) (305) 271-2146 (1:135/4)
Message #12236 "QuickBBS" (RECEIVED)
Date: 13-Apr-88 16:19
From: Mike Janke
To: Adam Hudson
Subj: Quick-Net
Lets see if I can explain this one... After entering about three
netmail messages the other day, then logging off, I noticed that two
of the messages were found and exported quite quickly and there was
something like "Scanning the Quick-Net message base". That may not be
the exact statement. Then it said "Scanning the QuickBBS message base"
and found the third netmail message I had entered, but it appeared to
take a LOT longer to find and export this message.
What's the difference in the two methods and how is it determined?
Just curious.
--- QuickBBS v2.00
* Origin: Kendall BBS (Why WOC when you can Fly!) (305) 271-2146 (1:135/4)
Message #12238 "QuickBBS"
Date: 14-Apr-88 09:09
From: Bob Westcott
To: Kevin Carr
Subj: Re: Doorware Conference
> Just wanted to say hello. Will be trying to get a hold of
> your board today so I can get a few doors to circulate them
> in the Dallas area. You have some pretty good doors. But,
> are you planning on ever putting security levels on the
> doors like John Morris did with his? Thanks.
I am in the process of making security levels available for the doors in the
near months as we now have the security level passed out to the doors which
is something new in the last few months.
Bob...
--- QuickBBS v2.00
* Origin: Author of Doorware 603-424-5497 (1:132/114)
Message #12239 "QuickBBS"
Date: 14-Apr-88 09:52
From: Bob Westcott
To: All Sysop's
Subj: Door's
Here is a list of all available doors from my system:
Stateline BBS (very Quick)
132/114
9600 baud HST
TW5A0388.ARC Tradewars 500 1 of 2
TW5B0288.ARC Tradewars 500 2 of 2
TW1KQ.ARC Tradewars 1000 1 of 2
TW1KSUPQ.ARC Tradewars 1000 2 of 2
CAST0288.ARC Castle
RiPP0288.ARC Ripper
BBSL0288.ARC BBS listing
TIME0388.ARC Time adventure
CAVE0288.ARC Cave Multi-user game
MARS0288.ARC Mars adventure
ALPH0288.ARC Alpha adventure
MONI0288.ARC Monitor for doors (does not monitor carrier)
CHES0288.ARC Chess Player versus Player
PIRA0388.ARC Pirate Multi user game
REVE0288.ARC Reversing number game.
ARAB0288.ARC Arab adventure
ADVE0288.ARC Age old Adventure game
SWOR0288.ARC Sword Adventure
CRAZ0288.ARC Crazy Adventure
ROVE0288.ARC Rover game
ATLA0288.ARC Atlantis Adventure
AROU0288.ARC Around the world 80 days adventure
KILL0288.ARC Killer game
CIA0288.ARC C.I.A. Adventure
CHAT0288.ARC Eliza door
KING0388.ARC Trivia Multi user game
All above doors can be File requested or D/L from my system.
Bob...
--- QuickBBS v2.00
* Origin: Author of Doorware 603-424-5497 (1:132/114)
Message #12251 "QuickBBS"
Date: 13-Apr-88 18:12
From: Kirk Paddock
To: James Vanhouten
Subj: Re: Version 2.0
In a certain sense, Yes the problem has been fixed. Repair consisted of
raising the new user security level, changing the read level of everything to
lower than the new new user security, and setting the write level to the new
security level. This permutation of changes apparently "Fixed" the
problem..?
--- QuickBBS v2.00
* Origin: The INFINITE T.A.R.D.I.S. (British alt. Science Fiction)
(1:343/23)
Message #12379 "QuickBBS" (RECEIVED)
Date: 17-Apr-88 01:51
From: Ray Patterson
To: Adam Hudson
Subj: net mail
Could you please tell me how I can get net mail addressed to other net/nodes
into my net mail area please? Unless it's addressed to a net/node listed in
qconfig mailtoss won't toss it. Yes I did RTFM and I can find no place where
this is addressed........Thanks.....Ray
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: The Night Owl (307) 235-5207 Casper, WY (1:104/301)
Message #12387 "QuickBBS"
Date: 12-Apr-88 12:47
From: Gary Funk
To: Doc Baba
Subj: Re: FILES
Not yet, I sent him the file and a follow up message, but have not heard
anything.
--- TBBS v2.0
* Origin: T R S 7 * Home of Trade Wars TBBS (501) 442-8777 (19/26)
Message #12389 "QuickBBS"
Date: 14-Apr-88 18:03
From: Greg Langham
To: Steve Lin
Subj: Re: HUNTING
To use PCBoard doors with QuickBBS, you run a little program right after the
user selects the door that creates a PCBOARD.SYS file. The program, of
course is in your .BAT file. There is one such program called QuickDOOR. It
is available on my BBS at (501) 521-4734 or on the author's BBS at (501)
521-8072. The file is QDOOR12.ARC, and works great...
Greg
--- QuickBBS v2.00
* Origin: The BoardWalk USA (501) 521-4734 Fayetteville, AR * (1:19/27)
Message #12390 "QuickBBS"
Date: 14-Apr-88 18:08
From: Greg Langham
To: Gary Funk
Subj: Re: IDEA..
I believe a help system would be nice for the many users who know most of the
commands, but where they may need a little reminder without going through a
long, descriptive menu...
Greg
--- QuickBBS v2.00
* Origin: The BoardWalk USA (501) 521-4734 Fayetteville, AR * (1:19/27)
Message #12396 "QuickBBS" (RECEIVED)
Date: 17-Apr-88 06:04
From: Bob Herrin
To: Adam Hudson
Subj: BBS registration
I need to correct a listing in your Registered User's List. I am listed as
the registrant for v. 1.02. In actuality, I was registering the software for
Dr. Rolf Roley, of Athens,GA. I am installing the software for him and acting
as co-sysop of his board, but the registration should be in his name, not
mine. Thank you.
Looking forward to the release of 2.01!
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12403 "QuickBBS"
Date: 16-Apr-88 23:26
From: Dale Weber
To: Steven Radich
Subj: Re: Quick 2.00
> I'll be glad to be a gateway from Fido-Net to Quick-Net, if
> anybody does NOT want to join Fido-Net..
Now, you aren't suggesting a network separate from Fido-Net are you. If
you are it's not a good idea at all.
8-Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12404 "QuickBBS"
Date: 16-Apr-88 23:29
From: Dale Weber
To: Jim Watson
Subj: Re: Protocals
> Well, I'm not sure why, but we seem to be having a
> problem with both Wxmodem, and Zmodem down here.
Make sure that you do NOT have a trailing "\" at the end of your
directory pathes in the option data of your menus.
8-Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12405 "QuickBBS"
Date: 16-Apr-88 23:32
From: Dale Weber
To: Shawn Ingram
Subj: Re: Full screen editor
Don't forget that EGA and VGA displays can go beyond 24 lines and that
full page displays like those for Desk Top Publishing DO go to the 66 line
maximum - an excellent reason for QuickBBS to allow a user to specify up to
66 lines per screen. NOW, if it would accomodate 132 column modes...
8-Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12406 "QuickBBS"
Date: 16-Apr-88 23:39
From: Dale Weber
To: Keith Medcalf
Subj: Re: Tear Lines
Hey guy, you are WAY OUT OF LINE with your language here. If you can't
put forth your objections in a decent mannor and possibly offer a little
constructive critisism rather than just flaming Adam's hard work then you
should just refrain from posting messages here. I don't care for seeing such
language in ANY echo any more than anyone else does, so kindly have a little
concideration for the rest of us and be decent about things.
8-( 8-( Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12407 "QuickBBS"
Date: 17-Apr-88 09:57
From: Bob Herrin
To: All
Subj: Viewing ASCII foles
I'm making progress in getting a BBS to be able to display ASCII text to
users that want to look at various files in a random manner, but I still need
some help!
I got Van Buerg's DRLIST and it works great from DOS. I can call in
remotely and bring up a file, but when I try to call the program from a menu
(currently using V. 1.02 of QuickBBS) the program doesn't echo to the remote
screen. On the local monitor it sits waiting with the prompt:
Enter Filename:
and the remote terminal freezes up. Anyone have any suggestions? Thanks in
advance!
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12408 "QuickBBS" (RECEIVED)
Date: 17-Apr-88 10:26
From: Bret Waddy
To: Adam Hudson
Subj: VER 2.0
I NOT ONLY HAVE PROBLEMS WITH THE TIME LIMITS BEING EXCEEDED ACCIDENTLY
BY USERS (USING FOR 10 MINUTES, BUT PUTTING IN LOG THAT THEY USED IT FOR 365
HOURS), BUT ALOT OF TIMES WHEN A PERSON DOWNLOADS 1 OR 2 FILES IT SAYS IN HIS
STATS THAT HE DOWNLOADED SOMETHING LIKE 36,545 FILES.
GOT ANY IDEAS ?
BRET WADDY POINT BLANK BBS (317)577-1661 INDPLS,IN
QUICKBBS VER 2.0
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12410 "QuickBBS"
Date: 17-Apr-88 11:21
From: Charlie Kron
To: All
Subj: Echogen/Echomail Toss Problems
Hi All!
I'm busily converting my RBBS board over to QuickBBS but am having
extreme difficulty in getting Echogen to Toss the incoming mail. More
specifically ECHOGEN -A -U -T goes and does it thing fine until it tries to
get PKXARC to unarc the incoming arced mail packets. ECHOGEN finds the
correct filename in the correct directory as specified in the ECHOMAIL.CTL
file. Then when ECHOGEN invokes PKXARC, PKXARC returns an errorlevel of 3
and the message PKXARC can't find -R.ARC is displayed! For the life of me I
can't figure out where the -R is coming from? Has anyone else encountered
this perplexing problem before? Also, the MAILTOSS program works fine but
PKXARC is not envolved there.
I just wanted to drop this message off first to see if anyone else had
seen this problem. If not, I'll provide a more detailed description of what
my setup is and what's in the various CTL files. Thanks.
Charlie
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12416 "QuickBBS"
Date: 17-Apr-88 11:43
From: Adam Hudson
To: Terry Parker
Subj: Re: Ansi...
> I have a couple of users that use terminal programs capable
> of interpreting "ansi" (though there is no such thing)
> music. They have complained that fairly often they will be
> going into a menu and get some "music" sent to them. I
> never had this happen with the old version, yet one of my
> most frequent users says it happens to him at least once
> every logon now with the new version.
Not sure what to say on this one, maybe if I knew how the ANSI music worked
I could track it down. Perhaps you could get me some information on it?
Thanks,
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12417 "QuickBBS"
Date: 17-Apr-88 11:44
From: Adam Hudson
To: Ron Hawkins
Subj: Re: Wxmodem and QuickBBS v2.0
> A 2400 baud caller selects Wxmodem to download a file. The
> file is sent successfully, but the user's keyboard is
> "locked up". By dropping to DOS locally (with the user
> online) we can manually enter
> "MODE COM1:2400,N,8,1"....... and all goes well. What
> happens is that QuickBBS somehow sets the BBS to 1200.
Thank-you, I will try and track it down ASAP.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12418 "QuickBBS"
Date: 17-Apr-88 11:45
From: Adam Hudson
To: Chris Petrilli
Subj: Re: Protocals
> I have had exactly the opposite problem. I use Telix 2.12,
> and every time I try to download using SEAlink, it bombs...
> 12 errors I think before Telix gives up.... Anyway, if I
> abot it, then restart it, it goes perfect. This even happen
> for batch transfers, I have to restart for each file. What
> gives? I know Telix is true to the SEA implimentation,
> since they use SEA's code...
I use a Pascal version of SEA's code (I sat down and converted it), however
it has not been fully perfected and still has many problems. The code acts
real strange and none of the problems make sense (what problems do?).
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12419 "QuickBBS"
Date: 17-Apr-88 11:46
From: Adam Hudson
To: Larry Snyder
Subj: Re: BEEP BEEP BEEP BEEP
> Adam, How about an option from the message read menu to
> toggle on/off the Seen By and Path lines?
Because SEEN-BY and PATH: lines are stripped before they even hit the
QuickBBS message base.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12420 "QuickBBS"
Date: 17-Apr-88 11:47
From: Adam Hudson
To: Larry Snyder
Subj: Re: message count
> Adam, MsgPack stated "901 messages numbered 1 to 880" -
> how can this be?
If you have other *.MSG files in that directory then EchoGen will account
those as messages even though they are not numbered like 1.MSG.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12421 "QuickBBS"
Date: 17-Apr-88 11:55
From: Adam Hudson
To: Shawn Ingram
Subj: Re: BEEP BEEP BEEP BEEP
> I do have a couple of questions, though... What,
> if any, utilities are available for QuickBBS???? What BBS
> Softwares' utilities may be compatible (Fido, OPUS, RBBS,
> PCB, etc)???? And what would it take to become a BETA test
> site.... I would like to help in any way that I can for
> the upkeep of such a fine software package....
You can give my system a call, there is a separate section for QuickBBS
related files (utilities and such).
There is programs already written to run RBBS-PC and PCBoard door programs
and things.
Right now I am not accepting beta-test sites, I have a small group of
testers already which I will most likely keep. I like to keep the group
fairly small and managable.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12422 "QuickBBS"
Date: 17-Apr-88 12:01
From: Adam Hudson
To: Larry Snyder
Subj: Re: msgutils kill -d option
> Adam, Does kill by date option (-d) take the date the
> message was entered on the original system or the date that
> the message entered my system?
It will compare the date on the message, so for local mail it is the time it
was entered on your system and for EchoMail is was the time it was entered on
the originating system.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12423 "QuickBBS"
Date: 17-Apr-88 12:06
From: Adam Hudson
To: Keith Medcalf
Subj: Re: By the way ...
> Is there any way that I can tell QuickBBS to run my
> MSG*.BBS files on another drive? I want it to put them on
> the E: drive, while all the rest of it is on the D drive.
> C is the system and my stuff, and F is the Files Areas.
> Can you think of a way to manage that?
Currently there is no option of where the messages files are placed, and
probably won't be in 2.01. Maybe in the release after that.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12424 "QuickBBS"
Date: 17-Apr-88 12:07
From: Adam Hudson
To: Tony Davis
Subj: Re: Wish List
> A feature I would like to have in a Future update is the
> ability for all new uploads to be checked against the same
> file we use for name and file searches to notify the user
> that the file is already on the BBS to stop duplicate
> uploads.
Good idea, I will consider it!
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12425 "QuickBBS"
Date: 17-Apr-88 12:13
From: Adam Hudson
To: Cindy Bartorillo
Subj: Re: qbbs 2.00
> 1. Whenever a caller "pulls the plug" instead of logging
> off normally, the board crashes (didn't happen in 1.02).
> This is no big thing, since we run the board through a
> recycle batch file. The only problem is that the time used
> that day in the USERS.BBS file is set to 0.
Could you explain what happens you said "the board crashes"?
> 2. Download limits are not checked for Zmodem or SEAlink.
> Apparently Ymodem works just fine. This was a problem in
> 1.02 also. In conjunction, the bytes downloaded that day,
> in the USERS.BBS file, is not updated for Zmodem and
> SEAlink transfers.
This is a bug and will be fixed in the next release.
> 3. User's time used being set to some high number and time
> used that day display set to something like 65535. We had
> this occur twice, both times when a user was returning from
> a batch Zmodem transfer.
I will check this one out!
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12426 "QuickBBS"
Date: 17-Apr-88 12:13
From: Adam Hudson
To: Dan Brown
Subj: Re: ASCII Protocol
> Out of curiosity, what happened to the ASCII transfer
> option? I never really had an occasion to use it, (or my
> users), just wondering.
It was trashed, the ASCII transfer options in QuickBBS 1.02 were terrible
anyways!
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12427 "QuickBBS"
Date: 17-Apr-88 12:16
From: Adam Hudson
To: Mike Janke
Subj: Re: Quick-Net
> Lets see if I can explain this one... After entering about
> three
> netmail messages the other day, then logging off, I noticed
> that two
> of the messages were found and exported quite quickly and
> there was
> something like "Scanning the Quick-Net message base". That
> may not be
> the exact statement. Then it said "Scanning the QuickBBS
> message base"
> and found the third netmail message I had entered, but it
> appeared to
> take a LOT longer to find and export this message.
>
> What's the difference in the two methods and how is it
> determined?
The first method is the quick shortcut way, if any problems are detected
when this first method is in progress then a full scan of the message base is
done. Your third message must have had something MAILSCAN didn't like and
therefore did a complete scan.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12428 "QuickBBS"
Date: 17-Apr-88 12:17
From: Adam Hudson
To: Ray Patterson
Subj: Re: net mail
> Could you please tell me how I can get net mail addressed
> to other net/nodes into my net mail area please? Unless
> it's addressed to a net/node listed in qconfig mailtoss
> won't toss it. Yes I did RTFM and I can find no place where
> this is addressed........Thanks.....Ray
If the other net-mail is from your system then you can get it in using
MAILTOSS, simply append a -F parameter in front of it. You can refer to the
documentation for more information on this.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12434 "QuickBBS"
Date: 17-Apr-88 12:32
From: Adam Hudson
To: Bob Herrin
Subj: Re: BBS registration
> I need to correct a listing in your Registered User's List.
> I am listed as the registrant for v. 1.02. In actuality,
> I was registering the software for Dr. Rolf Roley, of
> Athens,GA. I am installing the software for him and acting
> as co-sysop of his board, but the registration should be in
> his name, not mine. Thank you.
Thank you, I will put the change in!
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12436 "QuickBBS"
Date: 17-Apr-88 12:34
From: Adam Hudson
To: Bret Waddy
Subj: Re: VER 2.0
> I NOT ONLY HAVE PROBLEMS WITH THE TIME LIMITS BEING
> EXCEEDED ACCIDENTLY
> BY USERS (USING FOR 10 MINUTES, BUT PUTTING IN LOG THAT
> THEY USED IT FOR 365 HOURS), BUT ALOT OF TIMES WHEN A
> PERSON DOWNLOADS 1 OR 2 FILES IT SAYS IN HIS STATS THAT HE
> DOWNLOADED SOMETHING LIKE 36,545 FILES.
There are both bugs which will be fixed in the next release!
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12445 "QuickBBS"
Date: 17-Apr-88 08:01
From: Dale Weber
To: Greg Bell
Subj: Re: SHEDIT.ARC
> 8-Dale, I've been impatiently patiently waiting for the
> release of SHEDIT. I am using EDED in the local mode until
> SHEDIT is released.
I've got SHEDIT v1.00 available here for D/L by first time callers or
F/Req as SHEDIT.ARC for you and others that are interested. My board seems to
be one of the easier Betas to get access to (i.e. it's not as BUSY as some
others and hasn't gone DOWN for a LONG time.
8-Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12446 "QuickBBS"
Date: 17-Apr-88 08:04
From: Dale Weber
To: Greg Bell
Subj: Re: OMMM
> AMAX_102.arc, is this anything like OOPS?
Yes it is, but it's been written just for BinkleyTerm. I have used it
with BT and it works great! In fact, I keep my BinkleyTerm setup on the hard
disk as a backup just in case my Beta Dutchie has problems - I can easily
switch back and forth.
8-Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12447 "QuickBBS"
Date: 17-Apr-88 08:07
From: Dale Weber
To: Mike Neal
Subj: Re: How do you...
>> the existing messages along now. Seems echogen does fine
>> forwarding newly received messages, but how do I forward
>> messages already existing in the message base?
This isn't possible at this time. Hmmmm, I may have to dust off my
T/Pascal compiler...
8-Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12448 "QuickBBS"
Date: 17-Apr-88 08:10
From: Dale Weber
To: Cabell Clarke
Subj: Re: ECHOTOSS/ECHOKDUP
The v1.xx ECHOTOSS and ECHOKDUP programs are NOT compatible with QuickBBS
v2.0 right now. In fact, EchoToss is OBSOLETE and EchoGen now does all of
what that program used to do (and much better too!). Now we have full DUPE
checking on inbound EchoMail (I just got 14 dupes from Adam's system and they
were all caught and killed before being tossed or forwarded).
8-Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12449 "QuickBBS"
Date: 17-Apr-88 08:12
From: Dale Weber
To: Dwayne Rich
Subj: Re: Full screen editor
All you need on the Editor Command Line in Qconfig is "SHEDIT.EXE"
(without the quotes of course). You MUST have the ".EXE" too!
8-Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12450 "QuickBBS"
Date: 17-Apr-88 08:18
From: Dale Weber
To: Joe Terwilliger
Subj: Re: help with email
> As far as I new the E-Mail selection in the message base
> configuration area allowed the user to enclose a file with
> the message when he closes it. I don't see any difference
> to this selection and the Both selection.
The E-Mail selection isn't used at this time. What I would like to see is
this changed to something like "Usenet" or whatever and be processed just
like EchoMail EXCEPT, no Tear Line, Origin Line, or SEEN-BY's appended to the
message. I need a way to get my Usenet news groups out of QuickBBS without
the Fido-Net dependant information mentioned above. The MailIn/Out and
NewsIn/Out programs that I use to process outbound News adds a signature file
at the end of each message and a special ORGANIZATION environment variable
holds my Usenet compatible origin information. This is specific to the UFGATE
package which is what all the Gateways that I know of are running.
8-Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12451 "QuickBBS"
Date: 17-Apr-88 08:19
From: Dale Weber
To: Bob Westcott
Subj: Re: Door's
It would be nice to have the file sizes posted also so we can decide if
we want something and so we'll know how big it is BEFORE we F/Req it. I don't
care for surprises...
8-Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12452 "QuickBBS"
Date: 17-Apr-88 08:51
From: Dale Weber
To: Greg Langham
Subj: Re: IDEA..
> I believe a help system would be nice for the many users
> who know most of the commands, but where they may need a
> little reminder without going through a long, descriptive
> menu...
It isn't possible to have a generic help system since no two QuickBBS
systems need look alike and usually don't. If one uses descriptions that
really tell what a selection does, users shouldn't need extensive help. At
least I've never had any complaints. My menus are available for D/L or F/Req
as CASP-MEN.ARC (all 80 or 90 of 'em!).
8-Dale
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #12453 "QuickBBS"
Date: 17-Apr-88 13:46
From: Larry Ciak
To: William Prince
Subj: Re: ANSI Screens
Hmmmmmm.. maybe I am saving it wrong or have goofed! What? Me a Sysop GOOF?
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12454 "QuickBBS"
Date: 17-Apr-88 13:48
From: Larry Ciak
To: William Prince
Subj: Re: TDRAW
You forgot to mention that Sysops are the worlds WORST readers of
documentation.. but I was so desperate.. I actually DID read them.. but don't
let that out..GRIN
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12455 "QuickBBS" (RECEIVED)
Date: 17-Apr-88 13:49
From: Larry Ciak
To: Adam Hudson
Subj: Re: QBBS Config
Thanks for the reply.. the FOSSIL was the problem!
Thanks for your speedy reply..
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12456 "QuickBBS"
Date: 17-Apr-88 13:50
From: Larry Ciak
To: Paul Papasavas
Subj: Re: QBBS Config
Thanks for the info.. I'll call and get it..
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #12458 "QuickBBS"
Date: 17-Apr-88 08:05
From: Jim Vorheis
To: Don Menefee
Subj: Re: Full screen editor
> I was merely replying to a message that someone suggested
> I try Qedit,
I did tell someone to use Qedit. So, how did it work for you. I see
that you are not quoting my last message to you so you must not be
using it. I am using it for this message and it works great. I
decided not to use SHEDIT because of the --- SHEDIT v1.00 appearing in
all messages. I didn't mind it appearing in the echomail messages but
I didn't want that in my local messages.
Jim
--- QuickBBS v2.00
* Origin: The Intermittent Connection Littleton, CO. (303)797-0296
(1:104/60)
Message #12462 "QuickBBS"
Date: 17-Apr-88 08:58
From: Jim Vorheis
To: Keith Medcalf
Subj: Re: Tear Lines
>
> Keith Medcalf "Waiting for the next version"
Well Keith, as far as I'm concerned, I don't care if you ever get
QuickBBS working or not! I see no reason for the language that you
use in this echo, as there is a time and place for everything. I really
feel sorry for you if swearing is the only way that you can express
yourself to others!
Jim
--- QuickBBS v2.00
* Origin: The Intermittent Connection Littleton, CO. (303)797-0296
(1:104/60)
Message #12473 "QuickBBS"
Date: 16-Apr-88 18:04
From: Robb Topolski
To: All
Subj: QUPD_201.ARC ?? Where is it?
I've been trying to get on Adams board for some time. I just seems to eat my
FReq without returning anything. Where can I get the update and what is the
filename? --Robb
--- SHEDIT v1.00--- QuickBBS v2.00
* Origin: RADIO FREE AZ! -The Modem Radio Alternative- 602/890-0182
(1:114/25)
Message #12797 "QuickBBS" (RECEIVED)
Date: 13-Apr-88 15:59
From: Bob Rudolph
To: Adam Hudson
Subj: Re: Odds&Ends
I run QuickBBS with FD, but unless I have some event control inQuickBBS it is
possible for a user to overrun a brief event unless it is noted in the
Events. It doesn't happen often, but it does happen.
--- QuickBBS v2.00
* Origin: SystemHouse LINK FrontDoor/QuickBBS (1:261/999)
Message #12798 "QuickBBS"
Date: 15-Apr-88 10:18
From: Bob Rudolph
To: Jim Vaughan
Subj: Re: Questions....
One of the most common causes of multiple tosses is a grunged mail archive. I
have published in this echo a batchfile fragment set that will get rid of the
offending archive before it trashes you. ANYTHING that uses an
internally-called Archiver that does not delete what it classifies as a
fragged file will cause the same set of problems.
QhichBBS is not perfect, but it is working well enough that I manage to run
52 echo areas and feed more than 20 other nodes with it. I like the speed,
space savings, and the fact that there is not much that has occurred that
wasn't either fixed or supplied with a workaround.
Bob
--- SHEDIT v1.00--- QuickBBS v2.00
* Origin: SystemHouse LINK FrontDoor/QuickBBS (1:261/999)
Message #12799 "QuickBBS"
Date: 15-Apr-88 10:23
From: Bob Rudolph
To: Paul Papasavas
Subj: Re: ECHOKGEN.EXE
>> Version 2.0 is great, am throughly enjoying using it
>> without a hitch... well, maybe one. I got a virus type
>> message, inserted by a new node in my group that just
>> kept
>> being passed around for days. This message was
>> addressed
>> to some 5 digit net/node that obviously doesn't exist
>> like
>> 12345/341234. I deleted it for days but it kept coming
>> back and generating at times as many as 60 to 70 dupes
>> of
>> itself in my Binkley conference.
> I have been getting the same type of message on an off...
Such messages can be a consequence of the way that FrontDoor builds packets
- seems that it occasionally puts more than one NULL byte between packeted
messages, which causes some fields to look EXTREMEMLY odd. Jo has been
notified. I get around it by ARCmailing EVERYTHING that may contain more than
one message.
Bob
--- SHEDIT v1.00--- QuickBBS v2.00
* Origin: SystemHouse LINK FrontDoor/QuickBBS (1:261/999)
Message #12801 "QuickBBS"
Date: 15-Apr-88 21:03
From: John Roberts
To: Paul Papasavas
Subj: Re: DSZ/HST/Bink
I had come to that conclusion as well ... guess ya can't have it all both
ways, huh? No big problem ... most of the people I send mail to are getting
I/O bound a bit anyway ... 95 - 96% typically, so unlocking shouldn't hurt
much.
--- QuickBBS v2.00
* Origin: TELECO USA - Oklahoma City, Oklahoma - (405)670-4400 (1:147/22)
Message #12805 "QuickBBS"
Date: 14-Apr-88 23:25
From: Brian Murrey
To: All
Subj: Editor?
I am looking for something that I can use with Quick v 2.0 as a full screen
editor...any ideas as to what works best?
--- QuickBBS v2.00
* Origin: SouthSide QuickBBS v2.0 317-882-9330 *No Crash!* 2400bd
(1:231/30)
Message #12806 "QuickBBS"
Date: 16-Apr-88 08:01
From: Larry Snyder
To: All
Subj: shedit locally
I'm having problems running Shedit locally. When trying to edit a message,
Shedit dumps me to the fossil driver screen, while remote users have no
problems using Shedit.
I'm running X00, QuickBBS 2.00 & PC Dos 3.3
--- QuickBBS v2.00
* Origin: Region 11 Echomail Coordinator, (219)25-80286 *HST* (1:227/1)
Message #12807 "QuickBBS" (RECEIVED)
Date: 16-Apr-88 08:02
From: Larry Snyder
To: Adam Hudson
Subj: quickbbs 2.01
Adam, I thought QuickBBS 2.01 would be available after the 15th from your
system..
--- QuickBBS v2.00
* Origin: Region 11 Echomail Coordinator, (219)25-80286 *HST* (1:227/1)
Message #13009 "QuickBBS"
Date: 17-Apr-88 19:41
From: Adam Hudson
To: Larry Snyder
Subj: Re: external modem protocols using locked interface
> Adam, I'm running a locked fossil interface at 19200. When
> callers call the system at any speed, they can't download
> using external protocols. QuickBBS assumes the modem is
> operating at 19200 so passes that information to the
> external programs, which of course is incorrect.
The WXmodem protocol does not operate at anything above 2400, now that I
think about it. DSZ should go alright with the 19200 though.
The problem is that QuickBBS does NOT know the actual baud rate when you
lock the port.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #13010 "QuickBBS"
Date: 17-Apr-88 19:42
From: Adam Hudson
To: Bob Rudolph
Subj: Re: Odds&Ends
> I run QuickBBS with FD, but unless I have some event
> control inQuickBBS it is possible for a user to overrun a
> brief event unless it is noted in the Events. It doesn't
> happen often, but it does happen.
No need to worry, the soon to be release 2.01 fixes this. It will allow you
to use your events (in QCONFIG) even when running with a front-end.
Adam
--- SHEDIT v1.00
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #13014 "QuickBBS"
Date: 17-Apr-88 23:02
From: Ken Moss
To: Adam Hudson
Subj: Re: Odds&Ends
Can I ask when it will be released???
--- QuickBBS v2.01 (Alpha v0.00)
* Origin: QuickBBS Support Board, Arvada, CO, (303)423-3114 (1:104/24)
Message #13019 "QuickBBS"
Date: 17-Apr-88 13:48
From: William Prince
To: Mike Janke
Subj: Re: Ansi...
Would you be talking about 'MOONSONG"?. If anyone wants it I have it on
AUTO-BBS 503-257-0423. I am planning new 'animated' graphics using music as
well.
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #13020 "QuickBBS"
Date: 17-Apr-88 13:54
From: William Prince
To: Adam Hudson
Subj: Re: Ansi...
Adam,
.
There are ANSI Cntl codes to produce music. If you'll look into the 'brief'
documentation that comes with 'MOONSONG".ARC it mayt provide you some clues.
I think possibly that many sysops are as 'bad' as I in accidentally typing
the wrong character at times, I SURE am, and it is very possible to type a
'music' code rather than the one intended.
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOC'n! (1:105/55)
Message #13021 "QuickBBS"
Date: 17-Apr-88 21:33
From: William Prince
To: Adam Hudson
Subj: Ver 2.01
Hi Adam,
.
How about a Control Code switch for user statistics for showing if their
EDITOR (eg Shedit) is ON/OFF? Couldn't you use one of the (Reserved) ones?
.
Also, will the USEREDIT Add User created problem for Userpack and Usersort
be fixed in it?
.
Also, what is the future prospect of using other types of graphics screens
other than ANSI?
.
And while your at it, I want to WIN the 10 Million Dollar Lottery, a new
Ferrari GTS, East Clintwood's mansion in Carmel, Ca., Recal of the U.S. and
all State Income Tax laws,,,,,,,,,,,,,
.
TTYL later,
The PRINCE
AUTO-BBS 503-257-0423
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOCin'! (1:105/55)
Message #13022 "QuickBBS"
Date: 18-Apr-88 00:35
From: William Prince
To: All Or Shamal Software
Subj: Shedit
Is there something missing from the Shedit.ARC file? The 'Quotes' aren't
there and there are no instructions in the .doc file to indicate what the
editor is looking for in a quote file eg. <QuoteFileName> or exactly how to
create this file. The Cntl-KQ function puts (I suppose) one in Quote mode,
but reads that there is nothing there and I have yet to find a way in that
mode to create one, anytime you press ANY key that is supposedly a control
combination, as soon as you hit the Alphabetical Key in combination, you get
sent back to the message being edited.
.
AM I MISSING SOMETHING HERE????? I DO have a H.S. Diploma, with EXCELLENT
grades in English and have read the scanty (To say the least) documentation
of Shedit. I am not degrading the Shedit program, it seems to otherwise work
great, it is just that the Editor startup line has my users (and ME) asking
questions about the reference to 'Quote', etc.
.
Sure would apreciate some help in this matter!
--- QuickBBS v2.00
* Origin: Casper's Place QuickBBS - [503-239-4960] - No WOCin'! (1:105/55)
Message #13023 "QuickBBS"
Date: 17-Apr-88 03:06
From: Greg Bell
To: Adam Hudson
Subj: Bells & Beeps
I just ran into something that I feel really needs to be addressed. As you
know, Paging of the sysop is set in the Config.sys file. I have three times
during the day that I allow myself to be available for chat, but I don't want
to be desterbed by the normal users during the rest of the day, However, I do
want a way that I can be paged by my special users on the off hours that I
would normally not be available for chat.
The problem here is that there is only one time slot for chat and there is
no way to make a ^G beep the console under present conditions. I tried
making a file of ^G's that only my special people could get to at any time
but ran into a problem right off the bat. It rings the users bell just fine
(drives them crazy), but nada on this end. How about either implementing
more chat schedules (three at least) or creating a ^FG combination that can
be used in an .ASC file to ring the console bell? (preferablly both)!!!
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #13024 "QuickBBS"
Date: 17-Apr-88 03:11
From: Greg Bell
To: Dana P'simer
Subj: Shedit
Dana, I just installed SHEDIT and think it's quite good, but I can see one
real quick place to improve it. A ^H that would display a quick help menu of
the codes would really be helpful. The ^K? only works if you have something
in the Quote Buffer.
Thanks for a good editor though.
--- QuickBBS v2.00
* Origin: STARRCO Q-BBS, Waco TX (817)756-3210 WOCings just too slow!
(1:19/21
Message #13025 "QuickBBS"
Date: 17-Apr-88 09:03
From: Vernon Six
To: Jim Bolster
Subj: Re: SHEDIT
Jim-
Am I glad you mentioned the problem with SHEDIT. I thought I was going
nuts. Its just gives me the no quotes message and dies. In fact, QuickBBS
even dies and returns to the BATCH file.
-=[ Vern ]=-
--- QuickBBS v2.00
* Origin: The Data Emporium BBS (tm) - FidoNet Region 19 Coordinator
(1:381/1)
Message #13026 "QuickBBS"
Date: 17-Apr-88 09:14
From: Vernon Six
To: Keith Medcalf
Subj: Re: AUTOECHO & QuickBBS
Why all the moving of files? Why not just run AutoEcho in the QuickBBS home
directory?
I have been doing so for months. All you need is a SYSTEMx.BBS (Opus/Fido
Style) file in there also. Its no biggy.
-=[ Vern ]=-
--- QuickBBS v2.00
* Origin: The Data Emporium BBS (tm) - FidoNet Region 19 Coordinator
(1:381/1)
Message #13027 "QuickBBS"
Date: 17-Apr-88 09:18
From: Vernon Six
To: Bob Rudolph
Subj: Re: Tear Lines
As much as I hate to agree with anyone like Keith, I have to sorta agree this
time....
The tear lines in Matrix messages messes up such automatic programs like
these that I use....
AutoEcho, EchoFile, JobHunt, People-Meeting-People, etc
-=[ Vern ]=-
P.S. Thanks for the help with the points yesterday. It was appreciated.
--- QuickBBS v2.00
* Origin: The Data Emporium BBS (tm) - FidoNet Region 19 Coordinator
(1:381/1)
Message #13028 "QuickBBS"
Date: 17-Apr-88 09:21
From: Vernon Six
To: Greg Bell
Subj: Re: Shedit
How did you get it to work? It just dies whenever I try to use it.
-=[ Vern ]=-
--- QuickBBS v2.00
* Origin: The Data Emporium BBS (tm) - FidoNet Region 19 Coordinator
(1:381/1)
Message #13030 "QuickBBS"
Date: 18-Apr-88 05:05
From: Daniel Segard
To: Adam Hudson
Subj: Re: Message Data Base
.> QuickBBS does MARK the messages when it checks for mail...
Yes, but it removes the marks as soon as the marked message is read
(apparently). Could you leave the msgs marked for the duration of the
session like TBBS does? Maybe it's just me, but I would like it that way.
Just a suggestion.
--- QuickBBS v2.00
* Origin: The Cyber-Zone: (303)860-0126 (1:104/61)
Message #13031 "QuickBBS"
Date: 18-Apr-88 05:19
From: Daniel Segard
To: Lloyd Blauen
Subj: Re: QuickBBS v2.0!
I just captured your msg off and did a Hex dump of it. Sure enough there
were extra CR's embedded in it. The lines that had nothing but periods made
it very noticable. Period lines like this one:
.
.
.
When I displayed them in Hex they appeared as 0D 0A 0D 2E. You will
notice that a CR appears on each side of the LF.
By the way, I didn't get any msg following your quote of my message. I
presume that since you accurately quoted the Tear and Origin lines, that
somebody's mail package stipped any text that followed.
--- QuickBBS v2.00
* Origin: The Cyber-Zone: (303)860-0126 (1:104/61)
Message #13033 "QuickBBS"
Date: 17-Apr-88 09:36
From: Dan O'neal
To: Adam Hudson
Subj: Problem
Hi Adam...
I am haveing a problem with net & echo mail and was wondering if you had
heard this one yet.
When I log on locally and enter net or echomail the system does not pack it
up until a remote user logs off. Then it packs it up and moves it to the
outbound area.
I just changed to a HST 9600 modem and it didn't do that until then.
Got any ideas anybody?
DanO
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: The Byte Shop "Where everything is QUICKer" (303)794-5065
(1:104/311)
Message #13034 "QuickBBS"
Date: 17-Apr-88 10:39
From: Dan O'neal
To: Dan O'neal
Subj: Re: Problem
> When I log on locally and enter net or echomail the system
> does not pack it up until a remote user logs off. Then it
> packs it up and moves it to the outbound area.
> Got any ideas anybody?
> DanO
I never had replyed to my own message but here goes.
Never mind. I found the error. Dumd sysop error. Thanks.
DanO
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: The Byte Shop "Where everything is QUICKer" (303)794-5065
(1:104/311)
Message #13041 "QuickBBS"
Date: 17-Apr-88 19:09
From: Dana P'simer
To: All
Subj: SHEDIT and X00 v1.09[b|c]
I have been getting a lot of messages about SHEDIT logging people off
when they try to use it. I think the problem is in X00 v1.09[b|c]. I use
X00 v1.08 and SHEDIT was developed using OPUSCOMM v5.2. If I am not
mistaken, v1.09[b|c] are beta test copies of X00 and therefore this is
probably a problem in the FOSSIL.
Please, if someone is having this porblem and they are using X00 v1.08,
let me know so that I can narrow down the posibilities.
Thanks,
Dana P'Simer
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Quicker than Ridin' a Camel Into the Wind -- Boulder, Co.
(1:104/63)
Message #13044 "QuickBBS"
Date: 17-Apr-88 08:43
From: Cabell Clarke
To: Chris Petrilli
Subj: Re: Protocals
> I have had exactly the opposite problem. I use Telix 2.12,
> and every time I try to download using SEAlink, it bombs...
> 12 errors I think before Telix gives up.... Anyway, if I
> abot it, then restart it, it goes perfect. This even happen
> for batch transfers, I have to restart for each file. What
> gives? I know Telix is true to the SEA implimentation,
> since they use SEA's code...
My users are also complaining about SEAlink - they say it used to work fine
in 1.02 but that they have trouble with 2.00 -- the complainers are also
using Telix 2.12
--- SHEDIT v1.00--- QuickBBS v2.00
* Origin: ===={ Boot Factory }==== (1:13/19)
Message #13045 "QuickBBS"
Date: 17-Apr-88 09:07
From: Cabell Clarke
To: Keith Medcalf
Subj: Re: Tear Lines
You know Keith... I happen to agree with you that QuickBBS even in it's
latest incarnation, still needs a lot of work. And I too am waiting to see
what is going to happen before registering - having switched back and forth
between Opus and Quick several times now. But I also happen to think that
the FTSC standard 1.MSG, 2.MSG, etc etc is the absolute most absurd thing I
have ever seen, which is the major reason I want to run QuickBBS.
But all the problems (real and imagined) with QuickBBS do not excuse your
attitude in this echo. You could have said everything you did without
resorting to gutter eloquence... there is enough of that in some of the other
echos, although I have to admit that your message was one of the worst I have
ever seen in a National echo. I really think this is one of the more
informative echos and one of the only two that I follow on a daily basis any
more. I would really hate to see it deteriorate into a useless FLAME
forum... like so many others I used to read.
--- SHEDIT v1.00--- QuickBBS v2.00
* Origin: ===={ Boot Factory }==== (1:13/19)
Message #13046 "QuickBBS"
Date: 17-Apr-88 12:24
From: Cabell Clarke
To: All
Subj: SHEDIT
hmmm... very strange. Seems like Shedit will not exit if a user hangs up
while in the editor... I have to reboot the BBS. Am I overlooking a
command-line parm?? Has anyone else noticed this??
--- SHEDIT v1.00--- QuickBBS v2.00
* Origin: ===={ Boot Factory }==== (1:13/19)
Message #13075 "QuickBBS"
Date: 17-Apr-88 05:44
From: Dave Boisvenu
To: Joe Arlt
Subj: Re: BBS List..
Putting you down. If you know of any local QuickBBS's please send them to
me...
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: The Shock Systems QuickBBS - Shockingly Quick! (1:120/81)
Message #13076 "QuickBBS"
Date: 17-Apr-88 05:53
From: Dave Boisvenu
To: Adam Hudson
Subj: Re: MENUS
think it is a good suggestion too. So if you are open, what do you think of a
file called guest.ctl? Were the sysop may define guest users.. It can be set
up like this.
Name Security Level Password D/L Limit
---------------------------------------------------------
Guest User 10 Guessy 400
QuickBBS User 5 Adam 200
---------------------------------------------------------
SysOp wants no guests, Just don't have the file.. What do you think?
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: The Shock Systems QuickBBS - Shockingly Quick! (1:120/81)
Message #13077 "QuickBBS"
Date: 17-Apr-88 05:56
From: Dave Boisvenu
To: Dale Weber
Subj: Re: SysOp Page Toggle
> I've been asking about this for quite awhile now. I'm
> still hoping that Adam will ad it into the next version.
> He's already used most of the good Alt Key combinations
> though. Maybe he could make it Alt/A for chat Alarm ON/OFF
> toggle. I'd rather have Alt/P for Page Bell but Alt/B for
> Bell toggle would be ok too.
>
> 8-Dale
Why not just start using the function keys?
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: The Shock Systems QuickBBS - Shockingly Quick! (1:120/81)
Message #13078 "QuickBBS"
Date: 17-Apr-88 05:59
From: Dave Boisvenu
To: William Prince
Subj: Re: ANSI Screens
You can also shorten Ansi screens with Edlin... You just have to know what
codes to take out. Its real easy with ASCII just delete all the blank lines..
Dave
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: The Shock Systems QuickBBS - Shockingly Quick! (1:120/81)
Message #13079 "QuickBBS"
Date: 17-Apr-88 06:05
From: Dave Boisvenu
To: Adam Hudson
Subj: Registration..
Umm, Err, I know I have been promising to register QuickBBS, but I just spent
$55 on Monster's of Rock tickets (Couldn't beleive I got em).. So it might be
awhile yet.. Just thought I'd let yah know..
Dave
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: The Shock Systems QuickBBS - Shockingly Quick! (1:120/81)
Message #13080 "QuickBBS"
Date: 17-Apr-88 20:09
From: Dave Boisvenu
To: Nick Romero
Subj: Re: QBBS answer
> * Origin: Tulsa Lampoon - Is he really only 15 years old?
Ask em!
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Tony's Corner (Better'n OPUS!) Warren, MI. (1:120/13)
Message #13081 "QuickBBS"
Date: 17-Apr-88 20:17
From: Dave Boisvenu
To: Bill Heiser
Subj: Re: My board doesn't know *me* ! ! !
> My Quickbbs v1.02 doesn't seem to know who I am!!! When a
> user tries
> to enter a message to "sysop", the user is told that "that
> name"
> doesn't exist on the board! I have my name listed in the
> qconfig
> setup. Anyone else ever seen this?
>
> Thanks.
In the command do you have this in the optional data?
/T=Dave_Boisvenu
/|\
| Except your name.. You might have mispelled it.. Or misplelled you
name in the qconfig if they try enter you name in a message as sysop..
Dave Boisvenu
Send me all The QuickBBS 3's, SysOp, and Net Node Region you know of!
--- SHEDIT v1.00
--- QuickBBS v2.00
* Origin: Tony's Corner (Better'n OPUS!) Warren, MI. (1:120/13)
End of messages
QuickBBS Support Board -- QuickBBS Download Area
================================================
<!> Logoff <@> Time Stats <-> Main Menu
<L>ist QuickBBS Files
<D>ownload QuickBBS File(s)
<V>iew Inside of ARC File
<O>ther QuickBBS Files (Utilities and Such)
<R>ead QuickBBS Conference Messages
<Q>uick-Scan QuickBBS Conference Messages
<S>can QuickBBS Conference Messages
<E>nter QuickBBS Conference Message
QuickBBS Area Command? L
Press S to Stop or P to Pause.
*------------------------------------------------------------------------*
| QuickBBS Version 2.00 |
*------------------------------------------------------------------------*
QEXE_200.ARC 219574 03-30-88 QuickBBS v2.00 Executables
QDOC_200.ARC 96143 03-30-88 QuickBBS v2.00 Documentation
QNET_200.ARC 60522 03-30-88 QuickBBS v2.00 Net/EchoMail Option
QuickBBS needs a FOSSIL driver to run, X00 seems to be the best.
X00_108A.ARC 37358 12-25-87 X00 Fossil Version 1.08a
X00_109B.ARC 37610 01-20-88 X00 Fossil Version 1.09b (beta)
Other files you way need:
MYBATCH.ARC 1423 03-30-88 My Configuration and Batch Files
MYMENUS.ARC 25249 03-30-88 My QuickBBS Menu Files
BETALIST.TXT 1251 04-14-88* List of QuickBBS Beta Testers
WXMODEM.ARC 19801 03-30-88 WXmodem Driver for QuickBBS
CVTUSER.ARC 9471 03-30-88 Convert Opus Users to QuickBBS
CVTMSG.ARC 9270 03-30-88 Convert Opus Messages to QuickBBS
SAMPLE.Q-A 1316 03-08-88 Sample Questionnaire file for 2.00
SHEDIT.ARC 24066 04-14-88* SHEDIT: ANSI Full-Screen Msg Editor
Press [Enter] to continue:
QuickBBS Support Board -- QuickBBS Download Area
================================================
<!> Logoff <@> Time Stats <-> Main Menu
<L>ist QuickBBS Files
<D>ownload QuickBBS File(s)
<V>iew Inside of ARC File
<O>ther QuickBBS Files (Utilities and Such)
<R>ead QuickBBS Conference Messages
<Q>uick-Scan QuickBBS Conference Messages
<S>can QuickBBS Conference Messages
<E>nter QuickBBS Conference Message
QuickBBS Area Command?
QuickBBS Support Board -- QuickBBS Download Area
================================================
<!> Logoff <@> Time Stats <-> Main Menu
<L>ist QuickBBS Files
<D>ownload QuickBBS File(s)
<V>iew Inside of ARC File
<O>ther QuickBBS Files (Utilities and Such)
<R>ead QuickBBS Conference Messages
<Q>uick-Scan QuickBBS Conference Messages
<S>can QuickBBS Conference Messages
<E>nter QuickBBS Conference Message
QuickBBS Area Command? !
Would you like to leave a message to Adam?
<Y>es ... I would like to leave a message
<N>o .... I have no message for him
<W>ait .. Let me back to the system!
Logoff Option? N
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ
<EFBFBD> Thanks for calling the QuickBBS Support Board! <20>
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
<EFBFBD><EFBFBD>m<EFBFBD>ު<EFBFBD>s<EFBFBD>
NO CARRIER