32 lines
1.0 KiB
Plaintext
32 lines
1.0 KiB
Plaintext
|
pcs6000 138 - 160 mhz tx mod
|
|||
|
|
|
|||
|
|
|
|||
|
|
1. DISCONNECT THE DC POWER AND REMOVE BOTH TOP AND BOTTOM COVERS.
|
|||
|
|
|
|||
|
|
2. REMOVE FOUR (4) FLAT PHILLIPS SCREWS THE HOLD THE BLACK FACE COVER TO THE
|
|||
|
|
CHASSIS.
|
|||
|
|
|
|||
|
|
3. CAREFULLY REMOVE THE BLACK FACE COVER FROM THE CHASSIS.
|
|||
|
|
|
|||
|
|
4. AFTER THE FACE COVER IS OFF,REMOVE FOUR (4) SMALL PHILLIPS SCREWS HOLDING
|
|||
|
|
THE PC BOARD TO THE CHASSIS AND REMOVE ONE (1) FLAT PHILLIPS SCREW ABOVE
|
|||
|
|
THE MICROPHONE CONNECTOR.
|
|||
|
|
|
|||
|
|
5. CAREFULLY REMOVE TH PC BOARD.(NOTE): A LITTLE PRYING MAY BE NECESSARY,
|
|||
|
|
HOWEVER, EXTREME CARE MUST BE TAKEN NOT TO BEND THE PIN CONNECTORS.
|
|||
|
|
|
|||
|
|
6. AFTER THE BOARD HAS BEEN REMOVED, TURN THE BOARD OVER AND LOCATE DIODE
|
|||
|
|
D-207.
|
|||
|
|
|
|||
|
|
7. CAREFULLY REMOVE THIS DIODE FROM THE BOARD. THIS DIODE MAY BE
|
|||
|
|
DESOLDERED OR CUT OUT.
|
|||
|
|
|
|||
|
|
8. NOW REPLACE ALL OF THE COMPONENTS IN THE OPPOSITE ORDER IN WHICH YOU
|
|||
|
|
REMOVED THEM.
|
|||
|
|
|
|||
|
|
9. RECONNECT THE DC POWER AND THE ANTENNA AND YOU ARE READY TO TRANSMIT
|
|||
|
|
FROM 138.000 TO 160.000 MHZ.
|
|||
|
|
|
|||
|
|
BE SURE TO READ OVER SEVERAL TIMES BEFORE ATTEMPTING...GOOD LUCK...BILL
|
|||
|
|
|
|||
|
|
|