102 lines
3.8 KiB
Plaintext
102 lines
3.8 KiB
Plaintext
|
|
|||
|
|
|||
|
STAC ELECTRONICS
|
|||
|
TECHNICAL SUPPORT BULLETIN
|
|||
|
|
|||
|
NUMBER: 017
|
|||
|
SUBJECT: MAXIMIZE by Qualitas Corp.
|
|||
|
|
|||
|
DATE: September 6, 1991
|
|||
|
TIME: 4:30 PM
|
|||
|
|
|||
|
SOURCE: Tech Support
|
|||
|
SUPERCEDES/ TECH002
|
|||
|
SUPERCEDED BY:
|
|||
|
RELEASE STATUS: Public
|
|||
|
|
|||
|
TITLE: Using MAXIMIZE memory optimizer with SSWAP
|
|||
|
|
|||
|
|
|||
|
OVERVIEW:
|
|||
|
Maximize doesn't "know" about situations in which drive letters are
|
|||
|
abruptly switched during boot. This situation occurs when the Stac
|
|||
|
program SSWAP is used during the execution of config.sys.
|
|||
|
|
|||
|
ISSUES/COMMENTS:
|
|||
|
This procedure requires a bootable diskette. Refer to the FORMAT
|
|||
|
command in your DOS manual for instructions on creating one.
|
|||
|
|
|||
|
386MAX and BLUEMAX are equivalent programs for 386 based clones and
|
|||
|
386 based PS/2 machines respectively. In this technote, the term
|
|||
|
386MAX is used to refer to both programs.
|
|||
|
|
|||
|
RECOMMENDED ACTIONS:
|
|||
|
This procedure is to be used with the Qualitas Corp. program MAXIMIZE
|
|||
|
to modify your config.sys and autoexec.bat files to load all possible
|
|||
|
programs and drivers into high memory. It is designed to be used
|
|||
|
from a bootable diskette.
|
|||
|
|
|||
|
This procedure is NOT necessary if:
|
|||
|
1. A Stacker volume is not installed on drive C:, or
|
|||
|
2. The Stacker volume installed on C: is not being SSWAPed.
|
|||
|
For either of these situations, simply MAXIMIZE according to the
|
|||
|
Qualitas instructions.
|
|||
|
|
|||
|
You will need to know which drive letter refers to your boot drive.
|
|||
|
This can be determined by running the Stacker utility SWAPMAP. One
|
|||
|
of the lines will look like...
|
|||
|
|
|||
|
Drive x: was drive C: at boot time
|
|||
|
|
|||
|
Whatever letter is "x:" will be the boot drive. In the procedure
|
|||
|
below, the boot drive is referred to as "x:".
|
|||
|
|
|||
|
IF YOU ARE INSTALLING 386MAX FOR THE FIRST TIME...
|
|||
|
After booting normally, exit any shell program you may be using and
|
|||
|
unswap your boot drive by entering: SSWAP C: x: Then install MAX.
|
|||
|
DO NOT exercise the option to MAXIMIZE at this time.
|
|||
|
|
|||
|
STEP 1.
|
|||
|
If you've just installed 386MAX...
|
|||
|
Assuming you used the default installation options and the 386MAX
|
|||
|
files are all in x:\386MAX, enter the commands below and reboot the
|
|||
|
computer.
|
|||
|
MKDIR C:\386MAX
|
|||
|
COPY x:\386MAX\*.* C:\386MAX
|
|||
|
|
|||
|
STEP 2.
|
|||
|
Insert the bootable diskette into drive A: and enter the commands...
|
|||
|
COPY x:\CONFIG.SYS A:\
|
|||
|
COPY x:\AUTOEXEC.BAT A:\
|
|||
|
COPY x:\386MAX\MAXIMIZE.EXE A:\
|
|||
|
COPY x:\386MAX\MAXIMIZE.TRM A:\
|
|||
|
|
|||
|
STEP 3.
|
|||
|
Edit the autoexec.bat file on A: and insert the line...
|
|||
|
PATH=C:\
|
|||
|
as the first line. Save the modified autoexec.bat file.
|
|||
|
|
|||
|
STEP 4.
|
|||
|
Boot the computer from this diskette and run MAXIMIZE. MAXIMIZE will
|
|||
|
ask you to press Enter to reboot. Do so.
|
|||
|
|
|||
|
STEP 5.
|
|||
|
During this phase MAXIMIZE will give you the option of excluding
|
|||
|
programs in config.sys from consideration for being loaded high.
|
|||
|
Exclude any occurrances of SSWAP.COM from consideration. After a
|
|||
|
similar choice is made for autoexec.bat, the computer will reboot
|
|||
|
for the final phase.
|
|||
|
|
|||
|
STEP 6.
|
|||
|
Enter the following commands...
|
|||
|
COPY A:\CONFIG.SYS x:\
|
|||
|
COPY A:\AUTOEXEC.BAT x:\
|
|||
|
then reboot the computer.
|
|||
|
|
|||
|
STEP 7.
|
|||
|
If you wish to return to your former configuration enter...
|
|||
|
COPY A:\CONFIG.MAX x:\CONFIG.SYS
|
|||
|
COPY A:\AUTOEXEC.MAX x:\AUTOEXEC.BAT
|
|||
|
then reboot the computer.
|
|||
|
|