104 lines
4.8 KiB
Plaintext
104 lines
4.8 KiB
Plaintext
|
SEAGATE TECHNOLOGY, INC.
|
|||
|
Customer Technical Support FAX Network +1 408 438-8137
|
|||
|
Customer Technical Support Bulletin Boards (300-9600, 8-N-1)
|
|||
|
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ŀ
|
|||
|
<EFBFBD> United States +1 408 438-8771 <20> United Kingdom +44 628 478011 <20>
|
|||
|
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>Ĵ
|
|||
|
<EFBFBD> Germany +49 89 140-9331 <20> Singapore +65 227-2217 <20>
|
|||
|
<EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
(C)opyright 1991
|
|||
|
|
|||
|
|
|||
|
|
|||
|
ST-9052A
|
|||
|
|
|||
|
<20><> 44-pin I/O Connector (* see below)
|
|||
|
<20> o o
|
|||
|
::::::::::::<3A>::::::::1 o o
|
|||
|
<20>P<EFBFBD>W<EFBFBD>A<EFBFBD><41><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
|
|||
|
<20> <20> <20>
|
|||
|
pin-20 removed for keying <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> <20> <20>
|
|||
|
<20> <20>
|
|||
|
<20> <20>
|
|||
|
Drive is Master, no Slave drive present <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 0 0
|
|||
|
Drive is Master, Seagate Slave drive present <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1 0
|
|||
|
Drive is Slave to another ST9051A/ST9077A Master <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 0 1
|
|||
|
Reserved Position (Do Not Use) <20><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> 1 1
|
|||
|
|
|||
|
* Drive uses +5vdc power supplied to the drive
|
|||
|
via the interface connector. The drive does
|
|||
|
NOT make use of a +12vdc power line.
|
|||
|
pin-41 +5vdc (Logic)
|
|||
|
pin-42 +5vdc (Motor)
|
|||
|
pin-43 Ground
|
|||
|
pin-44 Reserved
|
|||
|
|
|||
|
ST-9052A
|
|||
|
|
|||
|
|
|||
|
UNFORMATTED CAPACITY (MB) ________________N/A
|
|||
|
FORMATTED CAPACITY (xx SECTORS) (MB) _____42.6
|
|||
|
ACTUATOR TYPE ____________________________VOICE COIL
|
|||
|
TRACKS ___________________________________
|
|||
|
CYLINDERS __PHYSICAL/LOGICAL______________NA/980
|
|||
|
HEADS ______PHYSICAL/LOGICAL______________ /5
|
|||
|
DISCS (2.5 in)____________________________1
|
|||
|
MEDIA TYPE _______________________________THIN FILM
|
|||
|
RECORDING METHOD _________________________ZBR RLL (2,7)
|
|||
|
TRANSFER RATE INTERNAL (mbits/sec)________up to 14.5
|
|||
|
SPINDLE SPEED (RPM) ______________________3,450
|
|||
|
AVERAGE LATENCY (mSEC) ___________________8.70
|
|||
|
BUFFER ___________________________________32/64 KByte SeaCache
|
|||
|
Multisegmented cache
|
|||
|
INTERFACE ________________________________AT BUS
|
|||
|
SECTORS PER DRIVE ________________________83,300
|
|||
|
TPI (TRACKS PER INCH) ____________________
|
|||
|
BPI (BITS PER INCH) ______________________
|
|||
|
AVERAGE ACCESS (ms) ______________________16
|
|||
|
SINGLE TRACK SEEK (ms) ___________________5
|
|||
|
MAX FULL SEEK (ms) _______________________27
|
|||
|
MTBF (power-on hours) ____________________150,000
|
|||
|
SHOCK (G's) operating/nonoperating _______10/150
|
|||
|
POWER REQUIREMENTS: +5V START-UP (amps) __0.9
|
|||
|
POWER MANAGEMENT (Watts):
|
|||
|
ACTIVE _______________1.9
|
|||
|
IDLE _________________0.8
|
|||
|
STANDBY ______________0.25
|
|||
|
SLEEP ________________0.25
|
|||
|
WRITE PRECOMP (cyl) ______________________N/A
|
|||
|
REDUCED WRITE CURRENT (cyl) ______________N/A
|
|||
|
LANDING ZONE (cyl) _______________________AUTO PARK
|
|||
|
IBM AT DRIVE TYPE ________________________*
|
|||
|
|
|||
|
Physical:
|
|||
|
Height (inches/mm): 0.49/12.5
|
|||
|
Width (inches/mm): 2.76/70.10
|
|||
|
Depth (inches/mm): 4.01/101.9
|
|||
|
Weight (oz/kg): 6.0/0.17
|
|||
|
|
|||
|
* MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE. ALSO, CHECK TO
|
|||
|
SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE
|
|||
|
AVAILABLE. (see below)
|
|||
|
|
|||
|
Possible translation: 980 cyl, 5 heads, 17 sectors = 42,649,600
|
|||
|
|
|||
|
Note: A "custom" or "user-definded" CMOS drivetype may ask for a
|
|||
|
numerical value for the Write Precompensation cylinder and for the
|
|||
|
Landing Zone cylinder. A basic rule-of-thumb for drive models that do
|
|||
|
not require the old Write Precomp technique or a Landing Zone because
|
|||
|
they are Auto-Parking is to add 1 to the cylinder value being used. As
|
|||
|
an example: If cylinders equaled 820, then both Write Precomp and
|
|||
|
Landing Zone would be entered as 821. Some BIOS will convert this to
|
|||
|
65535 or -1, which are functionally equivalent to "none (not used)".
|
|||
|
|
|||
|
PHYSICAL/LOGICAL equivalent to NATIVE/TRANSLATION
|
|||
|
|
|||
|
Already low-level formatted at the factory.
|
|||
|
|
|||
|
Since a User-definable or Custom translation geometry may be used, it
|
|||
|
is imperative that the values be written down and kept with your
|
|||
|
permanent records for retrieval in the event of CMOS battery failure.
|
|||
|
|
|||
|
Seagate reserves the right to change, without notice, product
|
|||
|
offerings or specifications. (10/21/91)
|
|||
|
|